Leaderboard

After blocking youtube in Russia I connect ipv6 protocol, but youtube app not work, only work in browser. Does it work with ipv6 or not? How to up the priority for use ipv6 over ipv4. How to disable ipv4 on TV, I can only disable ipv6.

I only created this account to thank you. I was using my OLED TV with my Soundbar without problems when this occurred. I followed your steps not thinking it would help much but it worked. Thanks a lot you saved my day.

webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though. I have deleted and reloaded the Sky News app, but the problem remains. Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?

We want airtel xtream stick on my lg tv

Why did the latest WebOS update 03.51,15 change my home screen settings? That is very RUDE It is MY home screen, not yours☹️

Just an update after contact with LG customer support. The trick seems to be to switch off the 'programme list update' in the satellite settings and this then re-activates the 'add satellite' option. Further, the nearest satellite was then also selected as was the case before the recent webOS update.

Hi Ana, I have a quite recent LG OLED 65 C3 (2023) which is a "smart" TV. When I first installed the TV, I also installed a lot of applications (that you can find in the LG content store). Of course I installed SPOTIFY among all the apps. Among all the new LG TVs, those that are using webOS are all elligible to get access a lot of app in the LG Content Store. From https://us.lgappstv.com/main (please change us with your country 2 letters), you can search for a specific model (for exemple mine is OLED65C3) for a specific application (for example SPOTIFY) or you can list applications supported. Generally when you have a webOS TV, there are generally like 3000 apps that you can install on your smart TV. Hope this will help you.

Yes, the connector you pictured is also known as TOSLINK. To connect to your device you need a fiber optic cable. It's not a wire. Your StreamLine TV should have the same connector and the cable will have a special connector on both ends that fits in both devices. Since it is fiber optic, be very careful to not put any kinks in the cable.

This is NOT an LG site, only a user to user support site. Try one of these, for watching camera footage on a phone or PC/Laptop: https://appstore.hikvision.com/

I have a lg webos tv (43LJ594V.ZA) and i want update the webos, but only uk models (...94.AEK) have updates. Can i use uk firmware to get update, i dont have special apps for country or language isnt a problem i can use with uk english (i install newer webos version with usb but lg support only have uk version)(i dont know what is ZA im form turkey)

Yes, any LG IR-remote will work.

I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve modified your TouchPad. Stuff You’ll Need Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need: 1. A 4-wire micro USB to USB A cable 2. 250k and 300k 1/4 watt resistors (1 each per cable) 3. Soldering iron and solder 4. Heat shrink or electrical tape If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need: 1. A 4 wire USB C to USB A cable 2. Items 2-4 above If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need: 1. A 4-wire USB C cable 2. A USB C board with 5.1k resistor and the housing for it 3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from 4. Items 2-4 from the first section above Prepare the Wires Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder. Build the TouchPad Side of the Cable See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with. 1. Solder the ground (black) wire to one side of the 300k resistor. 2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together. 3. Then solder the other end of the 250k resistor to the red (power) wire. Build the Charger Side of the Cable If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done! If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector. 1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below. 2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart. 3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done! Final Thoughts You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through. Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected. Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen. Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and live streamed it on Twitch so feel free to give it a watch. #webos4ever The post Guide: Create an “Original Barrel” Charging Wire for your HP TouchPad first appeared on pivotCE. Related posts: Guide: Converting the TouchPad’s Micro USB Port to USB C Putting a Touchstone in My Car: A Walk Through My Process Guide: Saving Apps From The App Catalog Part 1: nodeleteipk patch View the full article

Information about the reasons for turning off the TV (due to problems with the equipment or a normal shutdown with the remote control) is stored in the logs of the TV service menu. You can look there and evaluate what causes the shutdown. The decoding of the codes is here: https://webos-forums.ru/post174691.html#p174691.

The issue goes unsolved for almost two years now. LG is just happy with taking our money away - they either have a secret plan to educate us into using the remonte, or they don't know how to do it. Why would they allow for (multiple, I might say) Favs lists to be created, but make it harder to access them.. it makes no sense!

hello sir can you provide gCMOB application for our Tv we have installed CCTV cameras and to access that we need a application called gCMOB

Try Aerial webOS screensaver for webOS: https://webos-forums.ru/post176018.html#p176018

hi, i just need to listen to the audio of certain Youtube videos so is it possible to turn off the screen ?.............this is possible for Live TV though............😀

I recently also had a web application that wouldn't run on webOS until I converted my JavaScript modules to scripts. Are there plans to add support for JS modules?

Hi Packard8! In this tech world, it's mostly about trial and error. That's how I solved my problem. It sounds like your proposal with the bluetooth adapter could lead to success. I can't give you any other advice. /hans peter

Your a straight up Wizard my friend! ✨🧙🏽‍♂️ Just follow this magicians spell and it will fix your issue. I've been trying to fix this issue for months!I have LG OLED tv connected to a Marantz nr1510 receiver and I've tried everything to try and diagnose the issue.. plugging cables in and out, hard resets, soft resets, power cycles, new cords, you name it... I was ready to flip a coin and replace either the tv, or the receiver. Thankyou for saving me some money 🤘🏽

I also have this exact issue, and I am also on Rowridge, though I didn’t think of the transmitter being implicated. I can tell you the ‘fix’ - Settings/General/Programmes/Programme Tuning and Settings/Programme List Update - set this to Off. (The exact journey from Settings to Programmes varies across my four LG TVs). After that, if the programme list really changes, you will get ‘Programme Map Changed - do you want to retune Yes/No?’ and you can do this when it is convenient for you. As to the problem, it is the TV waking up once a night to check the Programme List, finding no broadcast channels, or thinking that it has, and in a massive failure of common sense, deleting all the ‘missing’ channels from your EPG, leaving only the few IP ‘channels’ that are always there, as per your first picture (even though I can’t see either image, I’m pretty sure what they look like). And then not waking up later on to check again, and maybe put the channels back. LG should fix the check so that if it finds no channels at all, it leaves things alone, or reschedules the check for an hour later, or some such. It would be interesting if anybody else reports the same issue here, and from what transmitter. I might ask Freeview what they think, as well.

lginputhook will let you remap any the mutton on Magic Remote JackSparrow @ Сменить функцию кнопки ivi/Netflix на пульте Magic Remote

Selamlar Aşağıdaki bağlantıdan güncel firmware'i indirip zip'ten çıkartıp FAT32 formatlı USB Flash'ın ana dizinindeki LG_DTV dizinini açıp sadece *.epk uzantılı dosyayı içine koyacaksınız. USB'yi cihazınıza takın https://gscs-b2c.lge.com/downloadFile?fileId=LGEKR_308435 Daha sonrasında ; telnet üzerinden cihaza erişim luna-send -n 1 luna://com.webos.service.apiadapter/system_launcher/launch '{"id": "com.webos.app.softwareupdate", "params":{"mode": "uzman", "flagUpdate": true}}' Komutu çalıştırın, donanım yazılımı projeksiyonda görünecektir. Orada seçip güncelleyebilirsiniz veya hemen ardından telnet üzerinden tekrar güncelleyebilirsiniz. luna-send -n 1 luna://com.webos.service.update/startUpdateThruUsb '{ "mod": "kullanıcı", "dosyaYolu": "/tmp/usb/sda/sda1/LG_DTV/PF50KA-KR_NA_MP_IC303-m2r-574.drto.m2r-3032-03.00.17-1F15_usb_V3_SECURED.epk", "goToSettings": true }' Not:"@eciraci" Yukarıdaki işlemlerle PF50KA Firmware'i yükledim. Mağaza ana menüye geldi. Mağaza boş gözüküyor ama arama menüsünden istediğim programı yazıp çıkan sonuçtan mağazaya yönlendirerek istediğim uygulamaları (iptv, netflix, youtube gibi) yükleyebildim. Bilgi paylaşan herkese çok teşekkür ederim.

Pointless asking as LG SHOULD just list models and magic remote compatible to save customers asking forums which are filled with people who don't help!

LG webos version 4.3 not supporting Sunnxt app for past 1 week. Kindly sort the issue.

Spinning tadpoles while I know I have a good internet connection as verified by Speedtest on my phone! do they want me to upgrade my TV or use an Amazon Firestick to do anything useful? planned obsolescence again! FFS I have 70’s video games that work, but a TV bought a few years ago has been made obsolete by auto upgrades that if i don’t accept I am reprimanded by support and told to accept?

As far as I know it works the same in all LG TV's press the home button to bring up the app list. Navigate to the app you're interested in then do a long press on the enter(OK) button, to enter EDIT mode.. HIt the enter(OK) button one more time then the UP arrow to delete

You english is perfectly correct. I am French and member of this community group (not a LG employee). I also bougth the C3 TV recently and I also have this logo that takes 2 seconds or so. But I choose to go directly to the "recent input" (your Entrada Reciente) so I bypass the LG menu (there is a paramter for this). However, I think your question is about how to bypass the logo, isn't it ? I don't have the answer for that. I think the logo is "mandatory". Phil.

Do you have any devices connected via HDMI? For example a DVD player, or a set-top-box or PVR? If so, check the cables are not low spec or bad. I had that exact issue, and it was an old/cheap HDMI cable, and even when NOT using that port, it would affect a TV channel display.

II hope in a future update we are given the option to disable the annoying pointer on the Magic Remote. VERY ANNOYING!!!!!!!!!!

Connect to the vpn from another device on your network and use this device ip as "gateway" from TV network settings.

I found a way to boost my download speed! I went into the connection settings on my TV and switched the IP address to manual. Then, I entered a custom IP address that works on my network instead of using the automatic setting. This bumped up my download speed from 7 MB to 22 MB! Just make sure the IP address you choose isn't already in use on your network.

i tried the edit function while using Youtube...............doesn't work.............when i click on ''screen off'' button - it says it won't work for certain apps...........i'm using the most budget tv model so maybe that's the reason ?

Hey I have an OLED C3 evo A Pioneer amplifier is connected to the optical output. I want to connect Bluetooth headphones and use them at the same time as the amplifier. The thing is, I haven't seen such an option on TV. It is possible to play simultaneously with the Bluetooth headphones and the internal speakers on the TV. There is no option for Bluetooth and the optical port at the same time. Am I missing something here? Thanks Dani

I have recently bought LG smart TV and facing the same issue on IPTV smarters pro. Unable to swap between audio tracks on TV itself. I can see options are available but arrow navigates between top settings and bottom fonts, can't select any other option. I have fire tv stick connected with same TV and there I can change the audio track in IPTV smarters pro. Did you guys receive any reply of your emails from smarters pro? or somebody got any hack. If someone can suggest any other free IPTV app for LG smart TV where the same credentials of iptv smarters pro can be used and have audio track option to select. Thanks

Yes!!!! add a password manager to web browser!!!!!!

Thank you! Been trying things for 3 months. This is the only solution that worked

I did these steps and it works…….but I have to do this often. TV also constantly drops the internet. I bought two LG TV’s a year ago and both have constant issues. Freezing, won’t connect to internet (fibre optic) and now these issues with my new sound bar. I have to unplug them to reset constantly. I will never buy LG again. I never had these issues with my Samsung’s.

Well, another vote up for @Rich Dowling. I did have to unplug the speaker one more time to get it to work. One question I had was "Turn HDMI control off at the TV and soundbar" Not sure what this means. I followed the other steps. like others, I wished I knew what caused the problem and why this worked. I have C9 and SK8Y which worked perfectly for a year until the sound out just stopped one day. As did the ability to turn the soundboard on with the TV. I have not re-connect any other HDMI port but for the soundbar. I'll report back

It’s a huge thank you from me too, as I was having the same problem and your procedure fixed it. It would be nice to know why it re-enables it but I’ll settle for the fact it works!

Well… it worked. I was skeptical as I had tried all these things but it appears that order matters. THANK YOU for posting this solution. My system had been working fine for years and just stopped a couple days ago. It had done this once in the past but a power reset (unplug from wall) solved the problem that time. Again, thank you for posting the solution - would really like to understand why this procedure works - what is set that gets reset and makes it work again.

thanks sir, i've created this account just to say THANKS, now arc worked fine on G1 + denon avr

My LG web browser stopped playing videos from some websites, but not all. Finally discovered that "Adaptive Streaming using Javascript" was enabled. I disabled this setting and the problem was resolved. To change the setting, go to the web browser's "settings" menu.

Hello, Since the recent update 04.70.85, my TV's internal speakers are not working. Is it possible to downgrade firmware? If yes, Can Some body share download link of previous firmware for above mentioned model (UAE). Or is there any way to re-flash existing firmware? Thanks in advance

...I wouldn't have posted if the obvious worked....

Updated: Download SDK Before you download the SDK, check that you meet the system requirements. Download the installer and/or the SDK package for your computer OS. If you choose to install the SDK with a network installer, you do not need to download the SDK package file. The network installer will do the job for you. Read the Installation Guide for step-by-step instructions on installing the SDK. For information on changes in this SDK release, see Release Notes. Linux Linux 64-bit Installer Installer_linux64.zip (5.41M) Linux 64-bit Package webOS_SDK_linux64.zip (1491.72M) Linux 32-bit Installer Installer_linux32.zip (5.76M) Linux 32-bit Package webOS_SDK_linux32.zip (1494.66M) Mac Mac 64-bit Installer Installer_macosx.zip (5.2M) Mac 64-bit Package webOS_SDK_mac64.zip (1468.86M) Windows Windows 64-bit Installer Installer_win64.zip (5.35M) Windows 64-bit Package webOS_SDK_win64.zip (1487.35M) Windows 32-bit Installer Installer_win32.zip (5.96M) Windows 32-bit Package webOS_SDK_win32.zip (1481.72M) CLI-only installation via network installer is recommended when: You have your own development environment or compact installation is required. Windows 10 is your operating system. Other components (e.g. IDE and Emulator) of webOS TV SDK are not fully tested on Windows 10 yet.

I am just wondering why LG went with WebOS, when with android TV you are sure that there will be ongoing development and huge team of people working on it. I just hoppe that someone will make available to change OS on TV as you can change it on phone, and i would emidiatly switch to Android TV!

Being LG Apps developer, I must disappoint you, but there will be no improvement in the nearest future. They have lack of staff and are very slow to even test the submitted apps, not to mention the development of OS itself. Their interest is only to sell millions of TVs.

TV is nice but there are a lot of details to be fixed. And as far as we know this is not a strong part of LG. Frustrating slow interface. TV may have worked a long time and can switch options menu, wait at least 10 seconds. All this happens in a dual-core processor. SmartShare again can not remember my desire, to i see the content in folders. Bad maintenance of subtitles. There is no possibility to change and preserve the default encoding to another on the list. At the same time can remembers the color, size and position of the subtitle. For extra as 3D dynamic subtitles, that each blu ray device supports, i do not even think. I do not want to talk about the strange consumer agreements and any restriction imposed by LG, if you do not accept. Such arrogance, even Apple does not allow.

Agreed, i alredy posted my disapoitment, I was fulled by the tv presentation about LGwebOS, it is actualy worse than any OS i have ever seen on TV as far the performance - the idea it selff is OK. switching chanels takes 3-5 sec opening seings somtimes takes up to 10 sec. you can only chose external or tv speakers not simuntaniasly and many more other things. I would gladly install google TV if there will be posibility or - even previuse LG smart tv OS