- 0
-
Similar Topics
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By atcronin
I remember when I first bought the TV in Nov '23, it would switch into PC mode (setting the HDMI input to PC) automatically when first connecting my RTX 4090 PC. This behaviour was fine as the TV was indeed being used for PC Gaming.
On my RTX 3050 HTPC I could disable PC mode by changing the input back to HDMI1. This would restore all picture settings options. This change would persist until the HDMI cable was physically disconnected/reconnected. Again, this behaviour was fine for my HTPC where I preferred having access to all the picture settings options vs 444 passthrough.
Now PC mode is reactivated after every Cold Boot (Shutdown > Power On) but not from Warm Boot (Restart).
It is a 'silent' PC mode as the input label does not change back to PC, however the same picture settings are greyed out like in PC mode. Switching the Input label from HDMI1 to another non-PC type disables PC mode again and restores the full picture settings.
I was using the RTX 3050 in my HTPC for a few months after I purchased the TV and did not experience this issue. After a few months I switched to the RX 7600 and continued to not experience this issue. I recently tried going back to the Intel iGPU on the HTPC and discovered this issue. I thought it might be an intel bug, so I reinstalled the RTX 3050 and found the issue again. I've gone back to the RX 7600 as it does not suffer this issue.
I have Game Optimizer options disabled (VRR, Freesync, ALLM), 444 Passthrough Disabled, QMS Disabled.
Intel and Nvidia GPU options tried:
Change output from RGB to YCBCR = no effect
Disable "Text Content Processing" on intel = no effect
Change "Content type reported" on Nvidia = no effect (Movie does activate film maker mode)
Also noticed that on the 3050 the TV switches to PC mode during POST (picture settings disabled in BIOS), while on the Intel iGPUs PC mode activates during Windows startup (picture settings enabled in BIOS, disabled at Windows login screen).
Testing performed on Win11 24H2, however also experienced the issue when testing LibreElec(Linux Distro for Kodi) on the intel iGPUs (didn't test Nvidia in LibreElec as unsupported).
Affected GPUs: UHD Graphics 730 on Intel i5-11400 and i3-12100, Nvidia RTX 3050
Unaffected GPUs: AMD RX 7600, Nvidia GT 1030
I've noticed that on the RX 7600 and GT 1030 the SPD Info Frame are blank/Unknown.
While on the UHD 730 - Product Description: PC, Vendor Name: Intel, Source Info: PC
and the RTX 3050 - Product Description: GeForce RTX 3050, Vendor Name: NVIDIA, Source Info: PC
-
By Maggie
The replacement remote for our lg tv (65uq7070zue) stopped working yesterday while i have kids home on winter break. I ordered a voice magic but even though i checked the specs several times and made sure the model number was specifically mentioned it won't pair and lg says it's the wrong remote. I stupidly reset the tv during this not thinking that it would totally unpair the tv from my phone remote app and it's now stuck on press the wheel/ok screen. I've ordered a lg brand remote but it'll be a couple days and it was supposed to be our movie day. Is there any way to switch the hdmi with it stuck on this screen so we can use the fire stick or playstation? Two universal remotes, one specific to lg tvs, have failed to accomplish anything as well.
-
By victoranthony
Hey everyone,
I have had LG TV for just two years. Last weekend, when I turned it on, it showed a blank white screen but was still illuminated, with sound working. No LG logo or image appeared. I unplugged the TV and held the power button for 30 seconds while it was unplugged, and the screen issue fixed the issue for a week[url=https://whitescreen.vip/
].[/url]
However, the same white screen problem has now returned, and the power reset trick no longer works.
Should I contact a local TV repair technician or reach out to LG customer support first? Any advice?
-
-
By Mano1496
Hi, I have a few months with an LG OLED C3 and tis week started to turn on different.
I'm aware that the Web OS logo appear when the TV install an update but that logo has a power outlet underneath and everytime I turn on the TV it's just the Web OS logo and my homepage takes like two seconds to load the order of my apps.
Is this normal? English is not my first language so sorry if it's hard to understand.
20240516_183105.mp4
-
Question
has66
I have problems with an old TV (42LB630V-ZA); the TV is working fine after start complete
but it doesn't start completely always; it display the logo and don't finish the boot
after multiple tries it starts and working fine until next start
is it posssible to re-write the software? now is at the last firmware available for this model Version 05.05.75
is here somebody to advise me how to get this resolved?
the local suport for lg is unable to resolve (I am wonder if they understand it or don't want to do it)
thank you
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.