Quantcast
Jump to content

Follow along to stay updated on LG's latest launches!
  • 0

LG TV won't work after update

JRay

Asked by JRay,

 Share

Question

JRay Newbie

JRay

Posted
Posted

Our TV just did an update and now certain buttons on the remote aren't working, and the TV won't stay on if it even comes on at all you get a dark blue screen and that is it.. such a great update. Now what do we do? The remote batteries have been changed and it still isn't working correctly. We unplugged the TV and then replaced it in.. ugh.. 

3 answers to this question

Recommended Posts

  • 0
Angel Beagle Contributor

Angel Beagle

Posted
Posted
1 hour ago, JRay said:

Our TV just did an update and now certain buttons on the remote aren't working, and the TV won't stay on if it even comes on at all you get a dark blue screen and that is it.. such a great update. Now what do we do? The remote batteries have been changed and it still isn't working correctly. We unplugged the TV and then replaced it in.. ugh.. 

That bites. I had the same update a few days without any problems. I was going to suggest what you did. 
 

Might have to contact LG customer service. You also can check to see if you have a reset button on the telly somewhere.

  • 0
Núria Newbie

Núria

Posted
Posted
On 12/13/2023 at 3:30 AM, JRay said:

Our TV just did an update and now certain buttons on the  remote aren't working, and the TV won't stay on if it even comes on at all you get a dark blue screen and that is it.. such a great update. Now what do we do? The remote batteries have been changed and it still isn't working correctly. We unplugged the TV and then replaced it in.. ugh.. 

i have the same problem exactly. What we have to do, LG?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • mean2
      Last input behavior changed after update
      By mean2
      Hello, after the last update of WebOS (6.5.0.-24) there is different behavior of returning back to previous input on my TV. When I was watching a Live TV and opened an app like Youtube, after closing it (holding the return button) it used to return to Live TV. The same with HDMI input, when I was playing on Playstation and the opened an app, after closing it it returned back to PS. Now after the update, it always go to the Home Screen when the app is closed. I only found in setting to return to last input when turning the TV on instead of Home Screen, but didn't find the same for the behavior after closing an app. Is there a way to fix it?
      Thanks
    • OliverRC
      Latest software update broke HDMI on my LG OLED G2?
      By OliverRC
      Up until a few days ago my TV and AVR have been working perfectly since I bought it.
      Zero hassles with HDMI and connectivity.
      Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
      Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
      I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
      This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
      I’ve tried:
      Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
      Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
      Marantz SR5015 Nvidia Shield Pro PS5
        The setup is the conventional AVR installation as shown in the attached file

       
      Has anyone else experienced this? 
      Is it possible to revert the software update?
    • David Daul
      Factory Reset, Remote Won't Work, Stuck on Press the OK button(wheel) on your remote (55NANO81ANA)
      By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • Ajothen
      Screensaver - last update.
      By Ajothen
      Hello,
      What have happen with screensaver? 
      It doesnt appear now and its dangerous for my Oled C3. It May cause burn in. 
      Why its like this now and when it will be fixed?
    • Horniak
      BUG: RTSP unplayable without 3rdparty equipment, Should work with ease according to LG.
      By Horniak
      BUG: Impossible to play an RTSP stream directly to LG WebOS.
      According to LG it should work:
      link hidden, please login to view "● Real-time Video Streaming
      WebOS supports various IP video streaming protocols, including RTSP/RTP/HLS and UDP Multicast, for live streams. Its excellent capacity for content playback facilitates easy management of real-time video content."
      ------
      After reading friggin everywhere, and on this forum, there is no easy way to do this without external products. I own 2 LG oleds, one 77" c1 and one 55" c4. And the c4 was bought with this usecase in mind.
      So, how do I open an rtsp:// stream on WebOs?
      Thanks

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...