-
Similar Topics
-
By jcol5786
Hello,
A few years ago I bought a 43" LG Model 43UK6200PUA, manufactured in 2018. I'm from Canada but I purchased this TV in the US. It was a store demo unit on for a great price. I took it home to Canada, set the location to Canada and setup up in our bedroom. It has been working fine with our Fiber TV service as well as Netflix, Amazon etc. We also to have a 60" LG TV in the living room which was purchased in Canada. This TV is similar in age to the one in the bedroom. Recently I started watching the LG channels on the living room TV. I hadn't really paid much attention to them before but now I enjoy them. My problem is that the LG channels do not work on the bedroom TV. I suspect because it was purchased in the US but located in Canada. With the location set to Canada the LG channel guide populates and shows what's on however when I select a program I get the following message.
LG Channels can't be serviced if a user changes 'LG Service Country' from Settings. In order to use LG Channels service, please restore 'LG Service Country' to its condition of original purchase
So if I change the location to the US I get this message.
Sorry, LG Channels is not available in your location. Please set your location to your current location in the settings. If you are in the service area, please visit www.lgappstv.com for help.
As you can see the messages sort of contradict each other also the website mentioned www.lgappstv.com is not working. I suspect that the location for this TV is set to the US at some deeper level. Any help would be greatly appreciated.
-
By JasonB
Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
-
By Phil7108
We recently subscribed to Paramount Plus to catch up on episodes we lost when our COX CONTOUR DVR died. Frequently when streaming an episode,the playback will suddenly freeze. If we try to go back, using the "undo" key, we can sometimes get the playback to resume, but it has rewound abp=out 10 minutes. After resuming playback, it will frequently freeze again. My wife is so frustrated, she wants to cancel Paramount. Any suggestions appreciated!
-
By Wingwalker
LG Television. Device ID: LG24-K8LPN2 Rowridge transmitter - BH22 (Dorset) I purchased a new LG television last week from Curry's but am having a repeated issue on the Freeview channels. The issue is that despite several attempts at clearing the memory and doing an automatic retune on digital channels - after an overnight switch off, they have all gone again by morning. I can view everything as normal during the daytime - including if the television has been turned off for a number of hours. The issue arises when I turn on the TV the following day after it has been turned off overnight. I am continuously left with just five channels starting at number 301 as per the image below. I have a set top box from BT and have tried retuning the TV both with the box connected, and without. The results are the same each time, no matter what I try. Daytime all is well, but after an overnight period I am left with the screen above. As you can see from the image below, everything is as it should be after yet another retuning session this morning. Please can you help? 
-
By Wingwalker
LG Television. Device ID: LG24-K8LPN2 Rowridge transmitter - BH22 (Dorset) I purchased a new 50" LG television a couple of weeks ago from Curry's but am having a repeated issue on the Freeview channels. The issue is that despite several attempts at clearing the memory and doing an automatic retune on digital channels - after an overnight switch off, they have all gone again by morning. I can view everything as normal during the daytime - including if the television has been turned off for a number of hours. The issue arises when I turn on the TV the following day after it has been turned off overnight. I am continuously left with just five channels starting at number 301 as per the image below. I have a set top box from BT and have tried retuning the TV both with the box connected, and without. The results are the same each time, no matter what I try. Daytime all is well, but after an overnight period I am left with the screen above. As you can see from the image below, everything is as it should be after yet another retuning session this morning. My previous TV was a JVC Fire and used to stop receiving the Freeview signal just after 1am each morning. I did a bit of googling and found out it was an energy saving thing to ensure the TV isn't left on all night if you fall asleep in front of it. With the Fire TV was there was a way to override this in the settings, although I never did anything about it as 99% of the time I was already in bed and therefore not a problem. I'm wondering therefore if this issue on my LG unit is in some kind of similar vein and just needs something to tell it to stop doing this reset??? Can anyone help me please as I'm getting sick of doing an auto tune every morning. Many thanks in advance. David.
-
Question
Daniele
Good afternoon everybody !
I live in Italy and I own an LG 49UF851V that I haven't used for years.
Being a non-Italian model with hbbtv support (which in Italy was not yet enabled in 2016), years ago, I had changed the code area to 3124 to enable the MHP protocol.
Now, in 2023, after having set the code area to 3122 (I don't remember the original one, I think it was Polish) and having correctly updated it (firmware 04.06.25.01) I am trying in every way to enable hbbTV for Italy without success , despite the technical specifications indicating that it is compatible.
By selecting "no country" in the localization menu, the hbbTV option appears regularly activated in the channel settings and, for example, when I tune to Mediaset channels, the hbbTV icon appears in the info banner but in reality it does not start.
Beyond this, obviously, the channel list is not according to Italian law and there are no Italian APPs in the Content store.
Searching the web I notice that the uf851v is practically identical to the uf850v and the uf852v except that it seems to be intended for a non-Italian but still European market.
Is there any way to solve it?
I thank you in advance and wish everyone happy holidays
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.