Quantcast
Jump to content

Recommended Posts

Posted

I used to have a JBL soundbar, connected via ARC. Now I switched to Denon soundbar again with ARC connection. But my tv doesn't turn off now, although all other functions are working fine on the remote. Any idea?

  • 3 months later...
Posted

This problem can occur due to a few reasons:

  1. HDMI-CEC Settings: Make sure that HDMI-CEC (Consumer Electronics Control) is enabled on both your TV and the soundbar. This feature allows the devices to communicate with each other. If it's already on, try turning it off and then back on to reset the connection.

  2. Update Firmware: Check if there's a firmware update available for your TV or soundbar. Sometimes, an update can fix bugs or improve compatibility between devices.

  3. Power Settings: Look into the power settings on both your TV and soundbar. There might be a setting preventing the TV from turning off when the soundbar is connected.

  4. Reconnect Devices: Disconnect the soundbar and turn off the TV. Wait for a few minutes, then reconnect the soundbar and try turning off the TV again.

If none of these solutions work, it might be worth contacting LG or Denon support for more specific assistance.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By crct
      I have a  42 inch LG OLED evo AI C4 4K Smart TV 2024 with a USE6S soundbar connected via HDMI.
      Up until a few days ago, the iPhone app was connected via WiFi. I could use it to control the sound effect.
      The sound bar remote could also change the sound effect, and the volume with the volume control visible on the TV screen.
      Now the iPhone app does not connect to the soundbar and the remote control doesn't appear to alter the volums: there's no on screen display.
      And also, the TV WOWcast output is not 'sticky': that it to say I can select it, and it remains for a time, but drops.
    • By Batman
      Device Name:-                                       [LG] webOS TV QNED756RA
      Product Name:-                                     LG 43QNED756RA AEK
      Product Number:-                                  95734309GGP74EKFLJP
      Serial Number:-                                     309MAUAGGP74
      webOS TV Version:-                              webOS24 / 9.2.1-42
      Programme Mode:-                               Antenna
      Software Version:-                                 23.21.30
       
      Recently while watching TV, the screen goes blank and then this message appears  'The app needs to close to save memory'  then the TV reboots to the program being watched.
      Any help and information as to what causes this would be appreciated.
       
    • By hollean
      I've just purchased an OLED48 C44 LA which comes with a US 60T soundbar. I've connected the soundbar to the HDMI earc socket. Because my hearing isn't too good I'd like to also have some heaphones plugged into the 3.5mm socket so that both the hdmi earc and 3.5mm socket have sound simultaneously. I've been into accessablity menu and the listen together option doesn't appear to offer both hdmiearc and 3.5 mm simultaneously. Has anyone found a solution to this problem?
      just to be clear, There is a setting which permits TV speakers plus wired external headphones. I just haven't found a setting which allows HDMI earc soundbar plus wired headphones.
       
    • By DeeDeee
      Wondering if anyone has any knowledge of, or opinions about, the best soundbar to go with a 55" C4, fir clear dialogue?
    • By Regis Wheeler
      Apparently, the LG model OLED55CSPUA has an issue with the external device power on/off control. I can configure the IR Bose soundbar well enough, as setup sequence tests it good to control soundbar power. but after exiting the setup, when i press the external device power button on the remote, the TV just wants to cycle through the setup again.  It doesn't toggle soundbar power, just cycles back to the setup.   i have tried factory settings reset and verified that there are no other devices on the TV.
×
×
  • Create New...