Quantcast
Jump to content

PreCentral: Sprint's totally cool with you using your old Pre on one of their MVNOs


Recommended Posts

Posted

Sprint's totally cool with you using your old Pre on one of their MVNOs

Got an old

link hidden, please login to view
or or sitting around that you'd like to put to work on another network? Turns out that even though, according to the Librarian of Congress' interpretation of the Digital Millennium Copyright Act the unlocking of cellphones is illegal without carrier approval, is totally on the side of giving you said approval.

Sprint announced today in a press release that they have no problem with you using your old Sprint phone on another network - so long as it's one of Sprint's own MVNOs (Mobile Virtual Network Operator). In essence, you can use your old Sprint phone on any network, so long as it's Sprint. The list of MVNOs that ride on Sprint's network is actually more than twenty operators long and includes popular names like Virgin, Boost, and Republic. Sprint's touting the option to use your old Sprint smartphone as the "Bring Your Own Sprint Device" program, taking the initiative to lower "the number of inactive phones in the market, diverting phones from landfills." Also, Sprint gets another paying customer without having to deal with the costs of subsidizing a new phone. A growing portion of the customers on Sprint's networks are on these MVNOs, which typically are of the pre-paid no-contract variety as opposed to the traditional post-paid contract system on which Sprint's network was built.

It's worth noting that Bring Your Own Sprint Device, as the name says, only applies to Sprint devices. And that's not just because Sprint hates that you happen to have sitting in a drawer. While it might be technically possible given the right proprietary bits to reprogram a Verizon phone to work on Sprint or vice versa (we may or may not have be done so with regularity ), it's a much more difficult endeavour these days. Besides, Sprint wants you to use their phones.

mf.gif


a2t.imgeZrdj4XRSGU

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Bidhu
      [URL=https://datingnow.site]Casual Dating: Find New Connections Tonight in Your City[/URL]

      Find Sexy Womans in your town for night
      https://datingnow.site
    • By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • By pivotCE
      I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
      link hidden, please login to view. Stuff You’ll Need
      Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
      1. A 4-wire micro USB to USB A cable
      2. and 1/4 watt resistors (1 each per cable)
      3. Soldering iron and solder
      4. Heat shrink or electrical tape
      If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
      1. A 4 wire USB C to USB A cable
      2. Items 2-4 above
      If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
      1.
      2.
      3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
      4. Items 2-4 from the first section above
      Prepare the Wires
      Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
      Build the TouchPad Side of the Cable
      See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
      1. Solder the ground (black) wire to one side of the 300k resistor.
      2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
      3. Then solder the other end of the 250k resistor to the red (power) wire.
      Build the Charger Side of the Cable
      If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
      If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
      1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
      2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
      3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
      Final Thoughts
      You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
      Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
      Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
      Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
      #webos4ever
      The post first appeared on . Related posts:

    • By Bidhu
      [URL=https://casualmatch.site]Casual Encounters Made Simple in Your Town[/URL]
    • Solution For That Pollution
    • By leodavid
      Hi,
      I've recently purchased a WebOS TV UK6400PVC and magic remote came with it. The software version is 4.10.30.
      The buttons work fine but for some reason, I can't get the cursor to appear on screen.
      Appreciate the help. Thanks
×
×
  • Create New...