-
Similar Topics
-
By akhil7j
I did a refresh of my LG TV 3 days ago. Sold the old LG 47" 3D LED TV and bought new 55" LG Super UltraHD TV with WebOS. I believe, the biggest con of this new TV is WebOS. Its totally frustrating. Sorry for WebOS fans.
It isn't that smart and functional they way it looks. The problem I having since 3 days and being a network engineer, I am unable to solve a network issue myself which is even more frustrating for me.
Ok, let me explain the issue. The TV when installed was connected to LAN cable to my router which has direct internet connection. The TV works and none of the apps were working. Basically TV wasn't able to connect to internet via apps. If i open web browser, it was working fine with all webpages showing correctly.
I'll skip the part of contacting LG support which was useless. All troubleshooting steps like resetting, formatting, changing time zone, location, region was done but no luck. Finally I connected the TV via mobile hotspot and it just worked which gave me the clue that some ports are being blocked by my ISP or router.
My internet setup is this way. Internet cable from ISP -> ISP Modem (can do NAT and work as router) - WiFi Router (NAT, DHCP, etc) -> all LAN clients. I put my LG TV in DMZ, opened all ports, etc but no luck. Then I converted my ISP modem as router and connected the LG TV directly to it and it started working..!!!
My WiFi Router is TP-Link Archer C7 and I was using stock firmware. Thought it was creating issues and I installed DD-WRT, Open-WRT but no luck at all. The apps which were installed in TV when TV was connected directly to modem are still working fine. Youtube, Plex, Netflix, etc all are working but when I open LG Content Store, it just refuses to load.
I am not sure what wrong my TP-Link router is doing. There is something wrong with the LG TV content store. If it requires to open ports, then I would like to know which ones.
Sorry for the long port, may be my frustration of 3 days with no luck.!!
-
By Tony Levy
I have a brand new LG OLEDC8PLA model and have both an input for my aerial and for my Satellite however i cannot seem to find anyway to switch from watching via my aerial, which is Spanish DTV and then switching to my Satellite to watch UK TV
I live in Spain hence the two systems. When I press the home button on the remote the list is at the bottom and displayed are LG Content Store HDMI3, LiveTV Freesat etc but no button with the aerial option, so the only way I can switch is to go into the main settings menu select Programme Tuning and switch the programme mode from Satellite to Antenna.
This does not seem a very smart way to be able to switch
Does anybody know if you can switch easily?
-
By leader6234
Hey guys !!!
I have a UHD UJ634v LG webos Tv that lately an error message pops on the screen staying : Tv signal has been lost due to the satellite LNB short.Check LNB connection"
This is really getting on my nerves because I can't get any signal even after resetting the TV or even updating to the last software version.
I check my cable line and fixed every possible problem. The error message keeps showing up even after disconnecting cable line from the back of TV just as if a short circuit or something has happened inside the Tv.
Do you think that'd be software or hardware failure or something else??? How to fix it?
Please help me out with this cuz all my lovely satellite TV channels are gone 😐
Here is the actual error message on the right top o the screen
Thanks in advance !!!
-
By Trung Hiếu Trần
Specs: LG OLED 55C3
Router speed: 250mbps
System: webOS 2.3
I have an issue with the connection when testing the speed via the web browser in webOS. Both Ethernet and Wi-Fi connections (I also used 5 GHz) have very low speed: 17 Mbps. I tried changing to use USB to LAN (USB 2.0) to at least reach 100 Mbps, but it doesn't seem to be working.
Any ideas on how to fix it?
-
By makem
I have a LG OLED55C14LB WebOS TV in the same room as my xubuntu desktop computer and router.
I have installed Gnome Network Displays on the Linux PC and both machines are on the same 5G network.
When I connect the PC to the TV via WiFi the TV puts up a 'cancel' option and no option to connect. The Network display app only has an option to 'Return' which closes the connection.
If I do nothing and wait the connection times out and returns to the TV program. The TV is obviously waiting for permission to connect.
I cannot see any way to 'accept' the connection via the TV remote. Can anyone tell me how to accept the connection?
In addition, is it possible to have the TV remember the WiFi password? Passwords are complex nowadays and it is a pain to keep having to input it. This make casting your desktop a chore.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.