- 0
-
Similar Topics
-
By starwoodtech
I have a 65 Inch LG OLED evo AI C4 4K Smart TV 2024 - Model OLED65C4PUA.ACC. here have been a many weird things happening. This is one of them:
I have 2 HDMI 2.1 cables attached to a Rogers Internet TV unit (HDMI 4) and the other 2.1 cable plugged into an XBOX Series X (HDMI 3). If the TV is on an HDMI 4 is active, and I turn on the XBOX (HDMI 3), the TV begins to swtich back and forth constantly and never ends until I turn off the TV. It will automatically switch itself from HDMI 4 to 3, then 3 to 4, then back to 3 again non-stop.
If I power off the XBOX, this behaivor stops.
Would anyone know why this does that? Is this a software or hardware problem? I tried to describe this to LG Support but they had no answers.
-
By starwoodtech
I have a 65 Inch LG OLED evo AI C4 4K Smart TV 2024 - Model OLED65C4PUA.ACC. here have been a many weird things happening. This is one of them:
Whenever I turn on my TV, it doesn't remember the audio settings I chose before. I repeatedly need to set my audio for the input I am using. I ofter select APPLY TO ALL INPUTS to try and make sure it's the same regardless of which input I use, but it still reverts all changes.
Does anyone know what this happens?
-
By denisuu
Hi all,
I'm wondering how you can get into the service menu (In Start) on an old LG Smart TV (42LB630V) running WebOS 1.4. I have a Samsung Galaxy S6 (SM-G920F) with a IR blaster, I have tried sending '0x04FB 0xFB04' to I which should be IR code to enter the menu, but that doesn't work.
I have also tried entering it with the SSAP-Web, but I get:
error: 500 Application error {"errorCode":-101,"returnValue":false,"errorText":"\"com.webos.app.factorywin\" was not found OR Unsupported Application Type" The SAPP-Web app does works though, because the TV does respond to Get info
{ "returnValue": true, "product_name": "webOS", "model_name": "HE_DTV_WT1M_AFAAABAA", "sw_type": "FIRMWARE", "major_ver": "05", "minor_ver": "05.90", "country": "omitted", "device_id": "omitted", "auth_flag": "N", "ignore_disable": "N", "eco_info": "01", "config_key": "00", "language_code": "en-GB" } The reason I want to access the menu is because I've enabled DEBUG mode on my TV through the NVM method and I want to enter a root shell trough UART to enable SSH and root access.
Gaining root access through NVM:
link hidden, please login to view -
By Fricassee
Hi,
I have an LG 43UH750V ZA TV which I have connected to a BT YouView box which in turn is connected to a broadband router. I normally do most of my viewing of TV through the Free View service provided via the BT You View box. On the LG TV there is a facility for web browsing. However, this does not appear to work through the internet connection via the BT You View box and the router.
Does anyone know if this is a valid configuration that should work or does the TV need its own direct internet connection to a router? Thanks.
-
By Wondering
After viewing photos/videos on a flashdrive plugged into the USB of an LG TV and using SmartShare to view... and then removing the USB and then no longer having access to the TV... I noticed on the flashdrive a new folder called "LG TV" and within what appears to be files that may have been the thumbnails displayed on the TV. My question is... do those thumbnails also remain on the TV as "recently viewed" history even without the USB plugged in? The LG Smart TV online user guide refers to "Recent" ("To view a list of recently viewed or added content, select Recent). Would thumbnails be there without the source flashdrive?
-
Question
dudinir
Hello,
Is it podsible to set up the internet browser to start automtically when tv start?
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.