Quantcast
Jump to content

Recommended Posts

Posted

Keep getting this message on the top right hand corner of the TV screen

"Your Magic Remote Signal Is Unstable"

There is a ton of lag, almost to the point where the remote becomes unusable, then it snaps out of it and works fine for 2-5 seconds then the lag comes back.

 

Other support forums suggested to hold down the back arrow and the home button simultaneously until the power button on the remote blinks.  I've done this, and it re-registers the magic remote, but it does not fix the lag.

 

I have also reset the TV back to initial settings, but still the lag persists.

 

Anything else I can try?

  • 1 month later...
Posted

Hello , i have the same issue with my 55UH850V , the remotes lags like crazy when i open up netflix or youtube, and then the pop up msg on the top right side "your magic remote is unstable" ,,, i have just writen on lg forum on cnet ill copy it here for you, if you have any update please let me know.

"Hello,

I have bought the latest LG 55UH850V super UHD 4K and HDR tv, all was working perfect until i started using Netflix and youtube, the remote started lagging, barely responding as if the receiver was barely getting the commands or like i was 30 meters away, so i cleared all items infront the tv (didn't work), then unpaired the remote and paired again (several times, didnt work), shut down the tv 30 seconds + removed the batteries and changed them (typical call center advises,,, didnt work) , updated firmware for tv + netflix + youtube (didnt work) and so i called LG techs in to have a look and they brought in another remote with the admin remote, nothing worked and then they took photos of the notification "your magic remote is unstable" that keeps popping on the screen because they never faced this before and they sent this to their main office for advise, they asked me to take the tv in for observation, then later they realized that the seller i bought it from doesnt cover the warranty with LG and so i have to pay for all : visit 40 usd and what they think the issue "wifi module" 190 usd which i didnt order yet... then I contacted my seller and he refused to pickup the tv for repair without a box which I discarded when i got the tv (bad move) ...

So anyone has any idea what's happening and how to fix, since i am cornered here...

Please do advise

Thanks"

  • 3 years later...
Posted

I Had this problem also and found buy making sure the TV was properly turned off each time I shut it down, then the TV and Remote always connect properly.

Go to Settings / General / Quick start+ (to OFF)

This will make sure the TV turns properly off and not just goes to sleep.

This fixed the remote control issue for me....

  • Like 1
Posted
14 hours ago, Noel Walker said:

I Had this problem also and found buy making sure the TV was properly turned off each time I shut it down, then the TV and Remote always connect properly.

Go to Settings / General / Quick start+ (to OFF)

This will make sure the TV turns properly off and not just goes to sleep.

This fixed the remote control issue for me....

Hey thanks so much man I will try this!

  • 2 years later...
Posted

I replaced the batteries with brand new, right from the package.  Then I registered the remote by holding the back and home button.  Lastly, I went to settings, connection, mobile tv, and made sure both settings were disabled.  Fixed the issue instantly and permanently.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Bidhu
      [URL=https://datingnow.site]Casual Dating: Find New Connections Tonight in Your City[/URL]

      Find Sexy Womans in your town for night
      https://datingnow.site
    • By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • By joepineapples90
      So I'm thinking about buying an oled65g46ls, however the included 'magic' remote would be useless to me, due to health issues (tremors).  So my question is, do any other LG remotes work with the G4?.
    • By News Reporter
      First Games From Famobi Now Available,
      Providing Family-Friendly Fun and Excitement

      SEOUL, Dec. 9, 2024 — LG Electronics (LG) has joined forces with Famobi, a German HTML game development studio, to introduce the first games playable with the LG Magic Remote. This collaboration aims to enhance the gaming experience by providing greater ease and enjoyment. The newly introduced games are optimized for seamless play with the LG Magic Remote, offering an interactive experience that enhances enjoyment and connection for family and friends.
      As part of this collaboration, LG Smart TV users can now play “Cut the Rope,”1 a mind-bending puzzle game packed with fun, using their LG Magic Remote for effortless and precise moves without the need for extra gaming controllers. Additionally, LG has recently brought the popular mobile game “Thief Puzzle”2 to its smart TVs, enabling users to enjoy various puzzle jigsaw challenges customized for the LG Magic Remote.
      Through numerous partnerships, LG consistently introduces new titles to its webOS platform, demonstrating its commitment to delivering compelling big-screen entertainment for family and friends to enjoy, with a steadily growing collection of 600 casual game titles.
      LG has been expanding its offerings with exciting games from Play.Works, which boasts the largest Connected TV (CTV) games catalog in the world. This includes popular titles such as “Wheel of Fortune,” “Tetris®” and “PAC-MAN.” The newly launched “SpongeBob SquarePants Bounce”3 allows players to embark on an underwater adventure with the beloved SpongeBob character, all from the comfort of their home on the big screen of an LG Smart TV.
      Furthermore, LG has teamed up with Simulmedia, known for pioneering a digital approach to TV advertising, to introduce PlayerWON. This in-game advertising solution seamlessly integrates high-quality, non-intrusive ads into gameplay. LG aims to support its game partner companies in achieving sustainable growth through a vibrant and evolving game ecosystem, offering engaging and interactive solutions that add to the gaming experience.
      With its exceptional technological prowess and a wide array of content from leading partners in the entertainment industry, LG’s webOS platform continues to expand and evolve, providing users with an elevated entertainment experience. Stay tuned to LG Newsroom for the latest news.
      # # #
      1 Available on LG Smart TVs running webOS 22 and above. The availability of the app on LG smart TVs may differ by TV model and country.
      2 Available on LG Smart TVs running webOS 6.0 and above. The availability of the app on LG smart TVs may differ by TV model and country.
      3 Available on LG Smart TVs running webOS 1.0 and above. The availability of the app on LG smart TVs may differ by TV model and country. 

      link hidden, please login to view
    • Solution For That Pollution
    • By pivotCE
      I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
      link hidden, please login to view. Stuff You’ll Need
      Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
      1. A 4-wire micro USB to USB A cable
      2. and 1/4 watt resistors (1 each per cable)
      3. Soldering iron and solder
      4. Heat shrink or electrical tape
      If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
      1. A 4 wire USB C to USB A cable
      2. Items 2-4 above
      If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
      1.
      2.
      3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
      4. Items 2-4 from the first section above
      Prepare the Wires
      Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
      Build the TouchPad Side of the Cable
      See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
      1. Solder the ground (black) wire to one side of the 300k resistor.
      2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
      3. Then solder the other end of the 250k resistor to the red (power) wire.
      Build the Charger Side of the Cable
      If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
      If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
      1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
      2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
      3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
      Final Thoughts
      You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
      Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
      Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
      Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
      #webos4ever
      The post first appeared on . Related posts:

×
×
  • Create New...