Quantcast
Jump to content

Question

Posted

I have a LG 55UH615T SmartTV.

 

1. I setup a few scheduled recordings from the digital TV (via Guide),

2. I have connected a USB HDD to the TV and

3. I then set the TV to standby (i.e. I switch off the TV but the power to the TV is still on).

4. Also, I disabled the HDD Eco mode to ensure the HDD don't go to sleep.

 

However, the TV doesn't record when the TV is on standby mode. Can anybody tell me how I can record when the TV is on standby mode? Can anybody tell me how I can record when the TV is on standby mode?

  • Like 1

5 answers to this question

Recommended Posts

  • 0
Posted

I have found a workaround to my problem.

 

I discovered that when you switch on the main power supply of the TV to standby mode, the scheduled recording don't work.

 

However, if you switch on the TV for a minute and then switch it off to standby mode, the scheduled recording works!

 

It seems when you power on the TV to standby mode, it doesn't supply power to the attached USB HDD or the TV don't know there is a USB HDD drive attached. But if you switch on the TV, it starts to supply power to the USB HDD or it recognises that USB HDD is attached. So, even when you switch off the TV to standby mode, the USB HDD is still supplied with power or recognised by the TV. As such, the scheduled recording works.

 

This is a bug of the webOS I think. Hopefully, LG fix it soon!

  • Like 1
  • 0
Posted

This is a very serious issue and I expect LG to come up with a solution soon.

 

Is there any difference, whether the USB port in use is 2.0, or else 3.0 ? I am using a 2.0 USB port, and having this same problem.

 

As for the workaround, it is not working for me.

 

Thanks & Cheers

  • 0
Posted

I have a 49UH651 with webos 3.0

I thought that recording from the schedule was not working when it actually was!

The problem was that when I switched on the tv and went to webos/recordings I saw a screen that said that there were none!

What is happening is that the tv takes a long time to acknowledge the disks existence. More than a minute.

You can see this when you look at the connections list. The disk is missing.

However when you go straight to webos/recordings it does not mention that it is still waiting for the disk, so you assume that the recording has not been made!

I wonder how many support calls this simple user interface oversight has caused!

  • 0
Posted

I'm having this issue too, but it's definitely not that the hard drive has not been found as it appears in the list of devices. The most annoying thing is that it seems to be intermittent, sometimes it works, more often it doesn't. Sometimes when it doesn't work, it 'forgets' the whole series, other times it is still there showing I have selected it to record, it just doesn't.

I do feel it's a power management issue, but really annoying that you basically have to be at home to make sure it's awake and recording! Defeats the object.  I haven't yet tried a new hard drive, but I'm reluctant to as it seems others are having the same issue. This was one of the main reasons I bought a smart TV so I'm very frustrated. 

  • 0
Posted

I have exactly the same issue with my LG 43UJ630V purchased in August this year.  Firstly very disappointed with the WebOS, lack of sufficient internal memory to run the 'apps' properly without constant restarts to 'free up memory' - no excuse for this really given memory is so cheap now. Anyway another major disappointment is the total inability of these sets to use USB Flash drives - LG claim this is due to the read/write limitation of said devices which is quickly exhausted by recording in HD/ 4k. Well all I can say is my six years old Toshibal  could manage this faultlessly . The LG however sometimes records OK then other times the recording simply stops after a few seconds.  Don't know if this is a 'power' issue or the almost new flash drive is now 'worn out' but whatever LG should either insure their products do what the advertising says or fix the problem. Concerning the 'restarting to free memory error' I did manage to get a call eventually from LG support tech who just stated these TV's are not like computers and cannot be expected to run their Smart TV Apps! Er, excuse me this was promised and is why I purchased the damn thing.  

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By atcronin
      I remember when I first bought the TV in Nov '23, it would switch into PC mode (setting the HDMI input to PC) automatically when first connecting my RTX 4090 PC. This behaviour was fine as the TV was indeed being used for PC Gaming.
      On my RTX 3050 HTPC I could disable PC mode by changing the input back to HDMI1. This would restore all picture settings options. This change would persist until the HDMI cable was physically disconnected/reconnected. Again, this behaviour was fine for my HTPC where I preferred having access to all the picture settings options vs 444 passthrough.
       
      Now PC mode is reactivated after every Cold Boot (Shutdown > Power On) but not from Warm Boot (Restart).
      It is a 'silent' PC mode as the input label does not change back to PC, however the same picture settings are greyed out like in PC mode. Switching the Input label from HDMI1 to another non-PC type disables PC mode again and restores the full picture settings.
       
      I was using the RTX 3050 in my HTPC for a few months after I purchased the TV and did not experience this issue. After a few months I switched to the RX 7600 and continued to not experience this issue. I recently tried going back to the Intel iGPU on the HTPC and discovered this issue. I thought it might be an intel bug, so I reinstalled the RTX 3050 and found the issue again. I've gone back to the RX 7600 as it does not suffer this issue.
       
      I have Game Optimizer options disabled (VRR, Freesync, ALLM), 444 Passthrough Disabled, QMS Disabled.
      Intel and Nvidia GPU options tried:
      Change output from RGB to YCBCR = no effect
      Disable "Text Content Processing" on intel = no effect
      Change "Content type reported" on Nvidia = no effect (Movie does activate film maker mode)
      Also noticed that on the 3050 the TV switches to PC mode during POST (picture settings disabled in BIOS), while on the Intel iGPUs PC mode activates during Windows startup (picture settings enabled in BIOS, disabled at Windows login screen).
      Testing performed on Win11 24H2, however also experienced the issue when testing LibreElec(Linux Distro for Kodi) on the intel iGPUs (didn't test Nvidia in LibreElec as unsupported).
       
      Affected GPUs: UHD Graphics 730 on Intel i5-11400 and i3-12100, Nvidia RTX 3050
      Unaffected GPUs: AMD RX 7600, Nvidia GT 1030
       
      I've noticed that on the RX 7600 and GT 1030 the SPD Info Frame are blank/Unknown.
      While on the UHD 730 - Product Description: PC, Vendor Name: Intel, Source Info: PC
      and the RTX 3050 - Product Description: GeForce RTX 3050, Vendor Name: NVIDIA, Source Info: PC
    • By Pranay Mokida
      I’d love to see a new feature in the next software update where the sound mode automatically adjusts based on the app being used. For example, when opening music apps like Apple Music or Spotify, the sound mode could switch to Music Mode, and for streaming apps like Netflix or Prime Video, it could switch to Cinema Mode.This addition would make the user experience so much smoother and more convenient!
    • By Hoghton Jim
      This is one of LG's Smart Web OS TV's and I understand you can record to a USB stick/hard drive.
      I wondered if anyone knows how many channels you can record at one time?
      Also does anyone know if there is any info available on using the PVR feature. i.e. can you record from the program menu etc.
      Many thanks.
    • By Cody94549
      We are able to EDIT some of the functions that are in the initial SETTINGS screen.  However other functions that are layers deep into the settings are unable to be dragged/dropped into that EDIT function. Like ASPECT RATIO. To get to that feature requires a long list of clicking things. It is a function that we use a LOT in order to prevent screen burn-in on these OLED screens. (to be able to watch a channel for extended period of time that happens to have that stupid LOGO or "crawl" along the bottom. Like CNN or MSNBC).
    • By StefanosBand
      Hello everybody . In the LG OLED 48C46LA TV (WebOs24) but the USB Recording is disabled, (country GREECE).Does anyone can Help me to enable this function Please?
  • Similar Tagged Content

×
×
  • Create New...