Quantcast
Jump to content

Follow along to stay updated on LG's latest launches!
  • 1

Factory Mode Floating Text Box

Mitzy

Asked by Mitzy,

 Share

Question

Mitzy Newbie

Mitzy

Posted
Posted

My LGwebos3 suddenly started to display a floating text box that reads " FACTORY MODE [How to go to user mode] Press Instop Key in a remote control." The tv image also suddenly has a green or sometimes blue tint to it and it resets to factory settings every time I turn it off. I have pressed every remote button in search is the Instop Key and checked the user manual... No luck! I bought he T.V. About two months ago. Issue started randomly but have been unable to resolve it. Help please!   By the way, the green tint is only there is using coaxial or HDMI but when I access the settings menu of the tv, it looks perfectly fine... Frustrated!

5 answers to this question

Recommended Posts

  • 0
RichieHindle Newbie

RichieHindle

Posted
Posted

The "instop" key is on the Service Remote, not the user remote that you get with the TV.  The good news is that if you have a smartphone with an IR blaster (eg. a Galaxy S5) or you know someone that does, you can use the free AnyMote app to "press the instop key" - AnyMote has that instop key for LG TVs.  Be aware that this will factory reset your TV, and who knows what else will happen!  It fixed this issue for me, but YMMV.

  • 0
phandad Newbie

phandad

Posted
Posted

I had this same "Factory Mode" problem when replacing the main board (EBT64292506) on my not quite 3 year old OLED55B6P-U TV. 

Did some web searching and found an LG "Factory SVC Remocon" MKJ39170828 - it has the "In Stop" button.  Purchased it for less than $10.  One push of the button and my TV was back to user mode ready for initial setup. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • David Daul
      Factory Reset, Remote Won't Work, Stuck on Press the OK button(wheel) on your remote (55NANO81ANA)
      By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • atcronin
      LG G3 - PC Mode Reactivates After Cold Boot on Nvidia and Intel, but not AMD GPU
      By atcronin
      I remember when I first bought the TV in Nov '23, it would switch into PC mode (setting the HDMI input to PC) automatically when first connecting my RTX 4090 PC. This behaviour was fine as the TV was indeed being used for PC Gaming.
      On my RTX 3050 HTPC I could disable PC mode by changing the input back to HDMI1. This would restore all picture settings options. This change would persist until the HDMI cable was physically disconnected/reconnected. Again, this behaviour was fine for my HTPC where I preferred having access to all the picture settings options vs 444 passthrough.
       
      Now PC mode is reactivated after every Cold Boot (Shutdown > Power On) but not from Warm Boot (Restart).
      It is a 'silent' PC mode as the input label does not change back to PC, however the same picture settings are greyed out like in PC mode. Switching the Input label from HDMI1 to another non-PC type disables PC mode again and restores the full picture settings.
       
      I was using the RTX 3050 in my HTPC for a few months after I purchased the TV and did not experience this issue. After a few months I switched to the RX 7600 and continued to not experience this issue. I recently tried going back to the Intel iGPU on the HTPC and discovered this issue. I thought it might be an intel bug, so I reinstalled the RTX 3050 and found the issue again. I've gone back to the RX 7600 as it does not suffer this issue.
       
      I have Game Optimizer options disabled (VRR, Freesync, ALLM), 444 Passthrough Disabled, QMS Disabled.
      Intel and Nvidia GPU options tried:
      Change output from RGB to YCBCR = no effect
      Disable "Text Content Processing" on intel = no effect
      Change "Content type reported" on Nvidia = no effect (Movie does activate film maker mode)
       
      Testing performed on Win11 24H2, however also experienced the issue when testing LibreElec(Linux Distro for Kodi) on the intel iGPUs (didn't test Nvidia in LibreElec as unsupported).
       
      Affected GPUs: UHD Graphics 730 on Intel i5-11400 and i3-12100, Nvidia RTX 3050
      Unaffected GPUs: AMD RX 7600, Nvidia GT 1030
       
      I've noticed that on the RX 7600 and GT 1030 the SPD Info Frame are blank/Unknown.
      While on the UHD 730 - Product Description: PC, Vendor Name: Intel, Source Info: PC
      and the RTX 3050 - Product Description: GeForce RTX 3050, Vendor Name: NVIDIA, Source Info: PC
    • Pranay Mokida
      Auto Sound Mode Switching Based on Apps: A Feature Request
      By Pranay Mokida
      I’d love to see a new feature in the next software update where the sound mode automatically adjusts based on the app being used. For example, when opening music apps like Apple Music or Spotify, the sound mode could switch to Music Mode, and for streaming apps like Netflix or Prime Video, it could switch to Cinema Mode.This addition would make the user experience so much smoother and more convenient!
    • Cody94549
      Feature Request: Allow the ability to PIN "ASPECT RATIO" to the EDIT MODE Settings
      By Cody94549
      We are able to EDIT some of the functions that are in the initial SETTINGS screen.  However other functions that are layers deep into the settings are unable to be dragged/dropped into that EDIT function. Like ASPECT RATIO. To get to that feature requires a long list of clicking things. It is a function that we use a LOT in order to prevent screen burn-in on these OLED screens. (to be able to watch a channel for extended period of time that happens to have that stupid LOGO or "crawl" along the bottom. Like CNN or MSNBC).
    • Rayden79
      Tv in standby mode, then off and do not power on
      By Rayden79
      I'm having this problem with LG Oled 65c16LA with WebOs Version 03.40.85
      When I turn off the TV, it goes into standby mode.
      After 2 minutes the red standby LED turns off and it is no longer possible to turn the TV back on with the remote or with the power on button.
      It is then necessary to unplug the power supply, wait a few minutes and reconnect it.
      So the TV goes back to standby and you can turn it on again. In use everything works.
      Is it a software problem? How can I solve it?
      Thank you

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...