- 0
-
Similar Topics
-
By Batman
Device Name:- [LG] webOS TV QNED756RA
Product Name:- LG 43QNED756RA AEK
Product Number:- 95734309GGP74EKFLJP
Serial Number:- 309MAUAGGP74
webOS TV Version:- webOS24 / 9.2.1-42
Programme Mode:- Antenna
Software Version:- 23.21.30
Recently while watching TV, the screen goes blank and then this message appears 'The app needs to close to save memory' then the TV reboots to the program being watched.
Any help and information as to what causes this would be appreciated.
-
By hollean
I've just purchased an OLED48 C44 LA which comes with a US 60T soundbar. I've connected the soundbar to the HDMI earc socket. Because my hearing isn't too good I'd like to also have some heaphones plugged into the 3.5mm socket so that both the hdmi earc and 3.5mm socket have sound simultaneously. I've been into accessablity menu and the listen together option doesn't appear to offer both hdmiearc and 3.5 mm simultaneously. Has anyone found a solution to this problem?
just to be clear, There is a setting which permits TV speakers plus wired external headphones. I just haven't found a setting which allows HDMI earc soundbar plus wired headphones.
-
By Kane Murphy
I have an LG C2 OLED TV. I have noticed that whenever I connect any player (Bluray or Set-top box) through HDMI and watch DV content with Bluetooth earbuds/headphones connected to the TV, the video's DV metadata is out of sync and causes delayed brightness change at every scene cut. In addition to that, I also see this weird outline for any moving objects in the scene as well.
This issue doesn't happen if I watch the DV content directly through the Webos player itself and I have watched a lot of stuff that way. The issue also doesn't happen if I watch standard HDR10 stuff through an HDMI player. It is only weirdly specific to the scenario where the DV content is played through an external player through HDMI and a Bluetooth audio device is connected to the TV. The issue again doesn't happen in the case of DV content playing through HDMI without any Bluetooth device connected to the TV.
It would be great if someone could confirm this is the case with their TV as well, and if anyone has any idea on why this is happening and what can be done to fix it.
-
By starwoodtech
I have a 65 Inch LG OLED evo AI C4 4K Smart TV 2024 - Model OLED65C4PUA.ACC. here have been a many weird things happening. This is one of them:
I have 2 HDMI 2.1 cables attached to a Rogers Internet TV unit (HDMI 4) and the other 2.1 cable plugged into an XBOX Series X (HDMI 3). If the TV is on an HDMI 4 is active, and I turn on the XBOX (HDMI 3), the TV begins to swtich back and forth constantly and never ends until I turn off the TV. It will automatically switch itself from HDMI 4 to 3, then 3 to 4, then back to 3 again non-stop.
If I power off the XBOX, this behaivor stops.
Would anyone know why this does that? Is this a software or hardware problem? I tried to describe this to LG Support but they had no answers.
-
By jikhead
I'm not getting any audio from the apps via the HDMI via ARC connection to my receiver. This occurred two weeks ago and was unable to resolve it, but ironically there was new firmware released that same day for my B6 (3/31/17) and this fixed the issue. However, now I again can't get it working after a TV reset and tinkering with the audio settings again. I tried to load the firmware again, but it appears this is not possible to forceable load the same firmware.
-
Question
fynotfi
Why do I constantly keep getting a box appearing on the screen warning that HDMI port one is disconnected, I have a HUMAX HDR‑1100S connected to this port which when turned off keeps displaying this message box, tv is LG OLED55E7N WEBOS 3.5
9 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.