- 0
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By RJ Fischer
New LG 55" C4, Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model.
-
By hollean
I've just purchased an OLED48 C44 LA which comes with a US 60T soundbar. I've connected the soundbar to the HDMI earc socket. Because my hearing isn't too good I'd like to also have some heaphones plugged into the 3.5mm socket so that both the hdmi earc and 3.5mm socket have sound simultaneously. I've been into accessablity menu and the listen together option doesn't appear to offer both hdmiearc and 3.5 mm simultaneously. Has anyone found a solution to this problem?
just to be clear, There is a setting which permits TV speakers plus wired external headphones. I just haven't found a setting which allows HDMI earc soundbar plus wired headphones.
-
-
By wallyricks
I have owned a couple of LG TV’s over the last 8 years, with the current one being a high-end 77” model.
I am still using LG TV SmartShare (v.33) as my “Media Player” v2.3.1511.1201 for my PC– which was last updated in 2015 but it is still compatible today. As proof, my latest TV is now 11 months old and I have had zero issue (until you see below).
link hidden, please login to view My PC setup is: Windows 10 Pro (with all latest updates) and a TP-Link Archer BE19000 (BE805) router. NOTHING has been changed on my router, TV (no updated or changed firmware) or any equipment moved around in the last 4 months.
Up until about 3 weeks ago, everything ran just fine. The SmartShare program was always defaulted to have Sharing ON, upon start of it, which is always when Windows boots). However, about 3 weeks ago, the SmartShare PC program has started to randomly change its status to Sharing OFF. I would then have to go into the program, manually change it to ON and then it works anywhere for 30 minutes up to 20 hours, and again, randomly change the Sharing to OFF.
I am an experienced PC user, and I am very sure that this has nothing to do with my WIFI because it’s not a dropped connection or random TV not being found. Something is happening inside Windows 10 that is triggering this status change. And it never fluctuates back to Sharing ON by itself.
Being so frustrated, I actually updated the Router to the latest firmware a few days ago, but this problem continues as before.
As an experiment, I installed an alternate Media Server program called Serviio. One can also see that when my Sharing changes to OFF, the two green lights turn red.
Anyone have an idea of what can be happening after nearly 8 years of not experiencing this? I am guessing that Windows is triggering some “Service” to stop running, but what can it be?
-
Question
michail71
I just routed an HDMI cable to my PC that is in a different room. Now I'm thinking it would be great if I could use the remote on the PC. Does such a thing exist? I didn't find anything when searching.
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.