-
Similar Topics
-
By Roy Brown
webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
I have deleted and reloaded the Sky News app, but the problem remains.
Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
-
By News Reporter
First Games From Famobi Now Available,
Providing Family-Friendly Fun and Excitement
SEOUL, Dec. 9, 2024 — LG Electronics (LG) has joined forces with Famobi, a German HTML game development studio, to introduce the first games playable with the LG Magic Remote. This collaboration aims to enhance the gaming experience by providing greater ease and enjoyment. The newly introduced games are optimized for seamless play with the LG Magic Remote, offering an interactive experience that enhances enjoyment and connection for family and friends.
As part of this collaboration, LG Smart TV users can now play “Cut the Rope,”1 a mind-bending puzzle game packed with fun, using their LG Magic Remote for effortless and precise moves without the need for extra gaming controllers. Additionally, LG has recently brought the popular mobile game “Thief Puzzle”2 to its smart TVs, enabling users to enjoy various puzzle jigsaw challenges customized for the LG Magic Remote.
Through numerous partnerships, LG consistently introduces new titles to its webOS platform, demonstrating its commitment to delivering compelling big-screen entertainment for family and friends to enjoy, with a steadily growing collection of 600 casual game titles.
LG has been expanding its offerings with exciting games from Play.Works, which boasts the largest Connected TV (CTV) games catalog in the world. This includes popular titles such as “Wheel of Fortune,” “Tetris®” and “PAC-MAN.” The newly launched “SpongeBob SquarePants Bounce”3 allows players to embark on an underwater adventure with the beloved SpongeBob character, all from the comfort of their home on the big screen of an LG Smart TV.
Furthermore, LG has teamed up with Simulmedia, known for pioneering a digital approach to TV advertising, to introduce PlayerWON. This in-game advertising solution seamlessly integrates high-quality, non-intrusive ads into gameplay. LG aims to support its game partner companies in achieving sustainable growth through a vibrant and evolving game ecosystem, offering engaging and interactive solutions that add to the gaming experience.
With its exceptional technological prowess and a wide array of content from leading partners in the entertainment industry, LG’s webOS platform continues to expand and evolve, providing users with an elevated entertainment experience. Stay tuned to LG Newsroom for the latest news.
# # #
1 Available on LG Smart TVs running webOS 22 and above. The availability of the app on LG smart TVs may differ by TV model and country.
2 Available on LG Smart TVs running webOS 6.0 and above. The availability of the app on LG smart TVs may differ by TV model and country.
3 Available on LG Smart TVs running webOS 1.0 and above. The availability of the app on LG smart TVs may differ by TV model and country.
link hidden, please login to view -
By Khelben Arunsun
As the title say, it is unfortunate that we cannot have access in those two apps and as far as I know many ppl waiting for them to be added… Hope to see them soon in webos app list. Thank you in advance.
-
By pivotCE
I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
link hidden, please login to view. Stuff You’ll Need
Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
1. A 4-wire micro USB to USB A cable
2. and 1/4 watt resistors (1 each per cable)
3. Soldering iron and solder
4. Heat shrink or electrical tape
If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
1. A 4 wire USB C to USB A cable
2. Items 2-4 above
If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
1.
2.
3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
4. Items 2-4 from the first section above
Prepare the Wires
Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
Build the TouchPad Side of the Cable
See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
1. Solder the ground (black) wire to one side of the 300k resistor.
2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
3. Then solder the other end of the 250k resistor to the red (power) wire.
Build the Charger Side of the Cable
If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
Final Thoughts
You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
#webos4ever
The post first appeared on . Related posts:
-
By leader6234
Hey guys !!!
I have a UHD UJ634v LG webos Tv that lately an error message pops on the screen staying : Tv signal has been lost due to the satellite LNB short.Check LNB connection"
This is really getting on my nerves because I can't get any signal even after resetting the TV or even updating to the last software version.
I check my cable line and fixed every possible problem. The error message keeps showing up even after disconnecting cable line from the back of TV just as if a short circuit or something has happened inside the Tv.
Do you think that'd be software or hardware failure or something else??? How to fix it?
Please help me out with this cuz all my lovely satellite TV channels are gone 😐
Here is the actual error message on the right top o the screen
Thanks in advance !!!
-
-
Similar Tagged Content
-
- 0 replies
- 7,016 views
-
- 4 replies
- 9,322 views
-
webOS OSE adds support for Raspberry Pi 4, dual displays, and more!
By Alex,
- rasberry pi
- dual display
- (and 1 more)
- 0 replies
- 6,440 views
-
- 0 replies
- 5,042 views
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.