- 0
-
Similar Topics
-
By Peter_T
LG Oled42c44LA; cable TV to CI+ module
Program guide works OK until ca. 17.30-18.00 . Then the guide only shows current programs. Inspecting later times is not possible. Only thing that helps is to unplug the TV and plug it in again. But the next day the problem is there again around the same time. Is this a problem of the LG TV? Is there a solution for this?
-
By RJ Fischer
New LG 55" C4, Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model.
-
By u84six
I haven't searched this forum, but there has to be others who find that tv remote pointer to be extremely annoying. I'm actually surprised that we still can't turn that feature off. Having the cursor/pointer feature isn't even close to the importance of being able to shut off. I mean, how hard is to put one checkbox in the ui to toggle the feature on or off? It seems like a no-brainer, big bang for the buck change that many users would appreciate
-
By joepineapples90
So I'm thinking about buying an oled65g46ls, however the included 'magic' remote would be useless to me, due to health issues (tremors). So my question is, do any other LG remotes work with the G4?.
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
-
Similar Tagged Content
-
- 3 replies
- 1,198 views
-
- 0 answers
- 656 views
-
- 0 replies
- 625 views
-
- 1 answer
- 3,041 views
-
Question
Sandip Nath
I have made the settings for Universal controller on the LG magic remote and it can now operate my set-top box, dvd player etc. with one exception. The tv remote can start/stop the settop box, change channels with the up/down arrow keys but there is no channel guide from where I select a channel visually. The channel guide page shows an empty table after the guide button is pressed on the remote. But everything is fine when I operate the STB with its own remote controller. I am using Tata Sky set-top box in India. Please help.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.