Quantcast
Jump to content

Switching between antenna and satellite mode transparently from scope of a favorites list


Recommended Posts

Posted

I've recently bought a LG OLED C9 PLA TV set, installed the latest version of firmware WebOS 4.71.XX. I like the WebOS interface, but there is one thing I absolutely don't understand and would appreciate to get solved:

I use the single tuner in both modes, satellite and antenna.

I'd like to have mixed favorites list from stations received from antenna and satellite and browsing between them without explicitly switching to satellite or antenna mode, thus having WebOS to automatically set satellite or antenna mode depending on the chosen station from the favorites list.

At the moment this is quite difficult to handle: Open the list from RC, open the filter (yellow button), switch between antenna/satellite -> the list is reset to All, again choose the favorites list of my choice.

I know it is possible to add mixed tuner mode stations to favorites, but there is always shown the portion matching the currently set tuner mode. This is quite difficult to handle.

Isn't there another way?

 

  • Like 1
  • 3 months later...
Posted

I 2nd this- and also sort out the Edit Favourites- very glitchy, with channels keep moving position overnight. One tip- Set Quick Access button 1 to BBC1 Frreview, and Quick Access button 2 to BBC1 Freesat- allows you to quickly switch between the two 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Rayden79
      I'm having this problem with LG Oled 65c16LA with WebOs Version 03.40.85
      When I turn off the TV, it goes into standby mode.
      After 2 minutes the red standby LED turns off and it is no longer possible to turn the TV back on with the remote or with the power on button.
      It is then necessary to unplug the power supply, wait a few minutes and reconnect it.
      So the TV goes back to standby and you can turn it on again. In use everything works.
      Is it a software problem? How can I solve it?
      Thank you
    • By Seppel
      Hi,
      i am in the process of purchasing several LG digital signage displays and need some more information before i place
      my order.
      I need a function like kiosk mode to start a website in full screen mode on device startup.
      The device would be a LG 43UH5N-E installed is webOS.
      Is this posswible with the onboard functionallity of webOS or do i need a 3rd Party App ore something?
      There is no need for a pagerefresh or such things, only display of es simple Website.
       
      thx for help me out.
    • By starwoodtech
      I have a 65 Inch LG OLED evo AI C4 4K Smart TV 2024 - Model OLED65C4PUA.ACC. here have been a many weird things happening. This is one of them:
      I have 2 HDMI 2.1 cables attached to a Rogers Internet TV unit (HDMI 4) and the other 2.1 cable plugged into an XBOX Series X (HDMI 3). If the TV is on an HDMI 4 is active, and I turn on the XBOX (HDMI 3), the TV begins to swtich back and forth constantly and never ends until I turn off the TV. It will automatically switch itself from HDMI 4 to 3, then 3 to 4, then back to 3 again non-stop.
      If I power off the XBOX, this behaivor stops.
      Would anyone know why this does that? Is this a software or hardware problem? I tried to describe this to LG Support but they had no answers.
    • By leader6234
      Hey guys !!!
      I have a UHD UJ634v  LG webos Tv  that lately an error message pops on the screen staying : Tv signal has been lost due to the satellite LNB short.Check LNB connection"
      This is really getting on my nerves because I can't get any signal even after resetting the TV or even updating to the last  software version.
      I check my cable line and fixed every possible problem. The error message keeps showing up even after disconnecting cable line from the back of TV just as if a short circuit or something has happened inside the Tv.
      Do you think that'd be software or hardware failure or something else??? How to fix it?
      Please help me out with this cuz all my lovely satellite TV channels are gone 😐
      Here is the actual error message on the right top o the screen 
      Thanks in advance !!!
    • Solution For That Pollution
    • By Hùng Mạnh
      Hello everyone,
      I have one of the model LG hotel tv: 50US660H for my project.
      But I don't know how to open the developer mode app and connect to PC for Develop
      Thanks for the help.
×
×
  • Create New...