Quantcast
Jump to content

  • 1

Different quality in webOS app vs HDMI input


Question

Posted

Hi,

 

I use Plex Media Server to stream content around the house. I have noticed the following:

- Using the Plex app on my Roku 3 (connected via HDMI) and playing 1080p content (Roku 3 is a 1080p device) the picture is okay

- Using the Plex app on webOS (i.e. streaming directly to the TV), and playing the same 1080p content, the picture is noticeably better, crisper, as if the upscaling is working much better when streaming directly to the TV

Problem is, Plex app for webOS is not very good and results in buffering (where there is no buffering when playing exactly same files on Roku3). Both Roku 3 and the TV are connected via a wired Ethernet connection, with fixed IP addresses allocated.

 

Any idea why the picture quality is different? I would be very happy if I could get the same picture from the Roku 3 as I do from the TV Plex app.

2 answers to this question

Recommended Posts

  • 0
Posted

Aplogies if you have already tried this, and I am not absolving the APP, BUT have you checked the the HDMI cable is a recent spec one (1.4A at least). If not, replace it with a better one, AND if the Roku is NOT using HDMI1 (usually the ARC one), try that as well. I had all sorts of weird issues when i first started using my smart LG TV, because of ONE down-spec cable.

  • 0
Posted

Apologies again, I should have looked at the supported status of your ROKU 3 box. It came out in 2013, and is no longer being manufactured. It seems that: "Roku is Ending Support for Older Models"

link hidden, please login to view

ALSO NOTE the note for your model: *** Supports 60fps at 720p. Supports 30fps at 1080p. [max seems to be 1080p so some of your source might only be going out at 720p, that might not be upscaleable by your TV]

HOWEVER: your Roku 3 (which is their model 4200X, internal name Mustang) IS UPDATEABLE, so do go to  
Settings > System update > Check now    to see if you have the latest updates.

INFO FROM:

It is also worth ensuring that the LG TV PLEX app is fully up to date too, but note "the app version you see on the LG store is like a boot loader. Once it runs on your TV it downloads the latest updated version of the “actual” client direct from Plex. update servers". LATEST I SEE IS: Version : 4.15.0
Platform(s) : LG webOS (2+ UHD)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By OliverRC
      Up until a few days ago my TV and AVR have been working perfectly since I bought it.
      Zero hassles with HDMI and connectivity.
      Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
      Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
      I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
      This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
      I’ve tried:
      Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
      Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
      Marantz SR5015 Nvidia Shield Pro PS5
        The setup is the conventional AVR installation as shown in the attached file

       
      Has anyone else experienced this? 
      Is it possible to revert the software update?
    • By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • By Khelben Arunsun
      As the title say, it is unfortunate that we cannot have access in those two apps and as far as I know many ppl waiting for them to be added… Hope to see them soon in webos app list. Thank you in advance.
    • By mean2
      Hello, after the last update of WebOS (6.5.0.-24) there is different behavior of returning back to previous input on my TV. When I was watching a Live TV and opened an app like Youtube, after closing it (holding the return button) it used to return to Live TV. The same with HDMI input, when I was playing on Playstation and the opened an app, after closing it it returned back to PS. Now after the update, it always go to the Home Screen when the app is closed. I only found in setting to return to last input when turning the TV on instead of Home Screen, but didn't find the same for the behavior after closing an app. Is there a way to fix it?
      Thanks
    • By magicschooldropout9
      Hello, 

      I have this TV for over a year.., Is there option to change the background image/painting dispalyed after turning TV on?

      Thank you a lot in advance, help would be a lifesaver  Here I found online manual  link hidden, please login to view
×
×
  • Create New...