Quantcast
Jump to content

Follow along to stay updaded on LG's latest launches!
  • 1

LG 75UN85006LA eARC issue

Leonard King

Asked by Leonard King,

 Share

Question

Leonard King Newbie

Leonard King

Posted
Posted

Having eARC engaged in the TV settings and sending Atmos etc to an eARC enabled Samsung sound bar causes the sound bar to power down after appx 18 minutes and diverts the audio to the TV's inbuilt sound system. Disengaging  eARC on the TV resolves the problem and still sends Atmos via ARC. This has only occurred since the most recent software upgrade. Anyone else experiencing this?

4 answers to this question

Recommended Posts

  • 0
td47 Proficient

td47

Posted
Posted

@Leonard King It may well be the update, BUT have you ensured that you have the latest spec (2.0 or 2.1) HDMI cables in use that fully support all your required eARC or ARC functions? It might just be that the latest updates has made the TV follow eARC spec more stringently.

  • 0
Leonard King Newbie

Leonard King

Posted
  • Author
Posted
5 hours ago, td47 said:

@Leonard King It may well be the update, BUT have you ensured that you have the latest spec (2.0 or 2.1) HDMI cables in use that fully support all your required eARC or ARC functions? It might just be that the latest updates has made the TV follow eARC spec more stringently.

Yeah, cables OK: Belkin Ultra High Speed 2.1. I'm not too fussed to TBH as I can get everything via ARC as long as Dolby Digital Plus is engaged in TV's audio settings. I was more interested in whether this was a common issue or exclusive to my set and should LG be informed.

  • 0
td47 Proficient

td47

Posted
Posted

@Leonard King Hi, I just happended to re-visit this interesting post of yours back from August. It seems that the Samsung sound-bar power-down during idle/no-signal can be set to OFF mode. However, I am unsure if the problem as you described it, is that since the FW upgrade, even with an active sound signal, and eARC active, the Samsung Sound bar was STILL powering down unexpectedly when before it was not?  Anyway, here is the link to do that, and you could then enable eARC again, to get back the CEC power-control functionality etc. :

link hidden, please login to view

  • 0
Leonard King Newbie

Leonard King

Posted
  • Author
Posted

Thanks for that info. I'm not really fussed about the sound bar powering down when inactive TBH. In fact it makes good sense. The power down during active use is a pain though, but as the Atmos signal can still be passed (via HDMI ARC ) even when not activated in the settings resolves it for me.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • jcol5786
      LG Channels not working. Location issue.
      By jcol5786
      Hello,
      A few years ago I bought a 43" LG Model 43UK6200PUA, manufactured in 2018. I'm from Canada but I purchased this TV in the US. It was a store demo unit on for a great price. I took it home to Canada, set the location to Canada and setup up in our bedroom.  It has been working fine with our Fiber TV service as well as Netflix, Amazon etc. We also to have a 60" LG TV in the living room which was purchased in Canada. This TV is similar in age to the one in the bedroom. Recently I started watching the LG channels on the living room  TV. I hadn't really paid much attention to them before but now I enjoy them. My problem is that the LG channels do not work on the bedroom TV. I suspect because it was purchased in the US but located in Canada. With the location set to Canada the LG channel guide populates and shows what's on however when I select a program I get the following message.
      LG Channels can't be serviced if a user changes 'LG Service Country' from Settings. In order to use LG Channels service, please restore 'LG Service Country' to its condition of original purchase
      So if I change the location to the US I get this message.
      Sorry, LG Channels is not available in your location. Please set your location to your current location in the settings. If you are in the service area, please visit www.lgappstv.com for help.
      As you can see the messages sort of contradict each other also the website mentioned www.lgappstv.com is not working. I suspect that the location for this TV is set to the US at some deeper level. Any help would be greatly appreciated.
    • JasonB
      ‘Temporary issue occurred’ when trying to program universal control
      By JasonB
      Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
    • Phil7108
      Issue with Paramount PLus Freezing
      By Phil7108
      We recently subscribed to Paramount Plus to catch up on episodes we lost when our COX CONTOUR DVR died. Frequently when streaming an episode,the playback will suddenly freeze. If we try to go back, using the "undo" key, we can sometimes get the playback to resume, but it has rewound abp=out 10 minutes. After resuming playback, it will frequently freeze again. My wife is so frustrated, she wants to cancel Paramount. Any suggestions appreciated!
    • starwoodtech
      Cannot select Optical + TV output if eARC is plugged in
      By starwoodtech
      I have an optical plugged into a hearing aid box. I also have an LG S95QR sound bar plugged into the eARC.
      Works fine in eARC. When I try to select the optical + TV option for output, it switches over ok for about .5 seconds, then automatically switches back to the eARC output without me doing it.
      Does anyone know what it might do this? Why can't I change my output if I so choose?
    • Solution For That Pollution
    • Wingwalker
      Repeated issue with Freeview disappearing overnight
      By Wingwalker
      LG Television.   Device ID: LG24-K8LPN2   Rowridge transmitter -  BH22 (Dorset)     I purchased a new LG television last week from Curry's but am having a repeated issue on the Freeview channels. The issue is that despite several attempts at clearing the memory and doing an automatic retune on digital channels - after an overnight switch off, they have all gone again by morning.    I can view everything as normal during the daytime - including if the television has been turned off for a number of hours. The issue arises when I turn on the TV the following day after it has been turned off overnight. I am continuously left with just five channels starting at number 301 as per the image below.     I have a set top box from BT and have tried retuning the TV both with the box connected, and without. The results are the same each time, no matter what I try. Daytime all is well, but after an overnight period I am left with the screen above.     As you can see from the image below, everything is as it should be after yet another retuning session this morning. Please can you help?      

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...