- 0
How to get back to tv hard drive recording after using a USB drive
-
-
Similar Topics
-
By Nooneuno
Our tv always needs to have the recording volume reset... the problem seems to be that the formatted disk has a small boot partition, about 150 mb, plus a 4 GB "main" volume, and the recording app "sees' the boot partition, and won't "hold" the setting for the main volume...
-
By Flavio_S
On LG OLEDs. You go on and disable SIMPLINK. Fine. But everytime you turn on your HDMI device it enables itself back again. This happens because they have disables two key features that were present in previous OSs, as you can see clearly here
link hidden, please login to view (they even put screencaps of the menus where you see the missing options in the 23) These functions are Auto Power Sync and Auto Device Detection.
Man updates are supposed to add functionalities not the other way around. It's very annoying to turn on your TV and have your AVR turn on without you wanting to.
Anyone found a solution for this problem?
-
By whaleandtuna
Please Help. I have LG qned tv with webOS 23
1) What I did: with svc remote -> in start -> 0413 and all, area option was changed.
I was trying many numbers to find the code for KR (which didn't work).
2) What I wanted : change area option from CA -> KR (widely known area codes do not work)
Original code: CAD 22411
3) Problem: Once I put a number between 19461 ~ 19489, Language&Country is set to EU and would not change the country with the other numbers.
Area option: 19461 ~ 19489 Continent index: 5 ~ 33 Language & Country: EU
Now I put 22411 to change it back to original region, but the country would not change from EU to CA, the area option is back to 19461.
If anyone is trying the area option numbers, don't put any number between them.
If any one knows how to resolve, please help me to escape from EU.. I am so desperate.
FYI just in case
hk 17930
hk 17935
co 17560
ph 15670
cn 17816
ja 17211
aj 17083
tw 17432
pa 17679
hn 18618
ca 18362
mx 18456
hn 18584
br 18789
cl 18876
pe 19033
ar 19123
ec 19251
jp 19345
-
By Laurence
I have an LG65UR80006LJ and when I plug my portable hard drive in to one of the USB ports, it lights up and sometimes the thumbnail folder gets added by the TV (I can see it when I plug the drive back into my PC) and twice now it has operated as expected and it appears as a device on the media app.
But it has only worked correctly twice and now doesn't find the drive at all, despite me having reformatted it and only add one file to the root directory (the first page if this makes sense; not buried in sub folders.)
Before I box the TV back up and send it back, is there anything else I need/can do as my 12 year old Philips smart tv has no problems what so ever finding the drive and playing the media on it?
Thanks in advance for your help.
Laurence
-
-
By williamsats
Hi everyone!!!
Lately I have a problem with my 40UH630V (OS Ver. 05.70.30). It takes too long for a hard drive or a USB stick to get it ready to play video files. That means that I have to plug in my hard drive or USB stick and wait for at least 4-5 minutes before I can play the video files, no matter what type/format they are. Sometimes I have to unplug and re-plug my drive so to read it.
Here I must point that both USB ports are clean with no dust or any corrosion, USB cables are new and fully functional and all hard drives and USB sticks are working perfectly on my 32LQ63806LC.
Also in some cases i get a message on TV for a format compatibility but I don't think this is the case, since if I wait 4-5 minutes (sometimes a bit more) then it reads them normally.
Any ideas?
-
-
Question
Alanf
Hello
After plugging in a usb hard drive, I discovered that I can only watch a programme while recording another from "Antenae" recording.
How do I switch back to "TV" recording please.
Regards
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.