EXPANDING PRODUCTION TO CREATE MORE OPPORTUNITIES IN BRAZIL
-
Similar Topics
-
By pivotCE
I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
link hidden, please login to view. Stuff You’ll Need
Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
1. A 4-wire micro USB to USB A cable
2. and 1/4 watt resistors (1 each per cable)
3. Soldering iron and solder
4. Heat shrink or electrical tape
If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
1. A 4 wire USB C to USB A cable
2. Items 2-4 above
If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
1.
2.
3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
4. Items 2-4 from the first section above
Prepare the Wires
Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
Build the TouchPad Side of the Cable
See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
1. Solder the ground (black) wire to one side of the 300k resistor.
2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
3. Then solder the other end of the 250k resistor to the red (power) wire.
Build the Charger Side of the Cable
If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
Final Thoughts
You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
#webos4ever
The post first appeared on . Related posts:
-
By News Reporter
LG Full HD Monitor (model 27BA560)1
Recent trends show that a lot of people prefer companies that take social and environmental responsibility seriously,2 and this holds true whether they’re working for them, or simply buying their products. This trend underscores the importance of Environmental, Social and Governance (ESG) principles, driving businesses worldwide to adopt more eco-friendly technologies, build low-impact facilities and design greener office spaces that are better for their employees and the planet.
Creating a more environmentally friendly office can involve a variety of measures, from using sustainable materials and installing solar panels to integrating low-carbon features. One of the simplest and fastest ways, however, is upgrading to energy-efficient IT equipment. Among the essential tools in a modern office, computer monitors stand out due to their constant use and significant influence on workplace productivity. Opting for energy-efficient monitors can significantly reduce an office’s overall energy footprint.
For businesses seeking a greener office setup, LG’s latest lineup of business monitors is an excellent choice. Featuring 20 newly launched B2B models, LG showcases its commitment to responsible product design and concern for the wellbeing of users and the environment. This isn’t just empty “marketing talk” – it’s backed by certifications from globally recognized energy and environmental standards. For example, the 27BA560 and 24BA560 models have earned the sought-after EPEAT Gold rating, while many others in the lineup boast EPEAT Silver or Bronze ratings.3 The majority of LG’s new business monitors are TCO Certified, indicating they are both energy efficient and ergonomically designed. Additionally, every model in the lineup is ENERGY STAR-certified. Beyond certifications, LG plans to calculate, manage and report on the greenhouse gas emissions associated with the lifecycle of its new monitor products.
LG Full HD Monitor (model 27BA560)1
Along with sustainability, LG’s business monitors take user comfort and productivity into consideration. The company’s versatile and efficient workplace solutions come with adjustable stands that promote good ergonomics, and eye-friendly features like Reader Mode. Designed to meet the diverse needs of professional environments, the expansive lineup offers a variety of aspect ratios (16:9 and 21:9) and screen resolutions (from Full HD to QHD) to choose from. With various ports, including USB-C, and built-in speakers and webcams,4 LG’s business monitors enable seamless video conferencing and enhanced multitasking, allowing users to charge their devices and efficiently manage their work at the same time.
With the introduction of its business monitor lineup, LG is not only supporting global businesses in their ESG efforts, but also reinforcing its own commitment to ESG-driven management and sustainable product design. The company will continue to deliver premium workspace innovations that simultaneously boost productivity, support the health of users and put less strain on the environment.
To learn more about LG’s business monitor lineup, visit the
link hidden, please login to view. # # #
1 The image is staged to enhance the reader’s understanding.
2 Source:
3 EPEAT (managed by the Global Electronics Council) assesses IT products for lifecycle sustainability. Models 27BA850, 24BA850, 27BA750, 24BA750, 27BA650 and 24BA650 have all earned a Silver rating from EPEAT, while models 27BA550, 24BA550, 27BA450, 24BA450, 27BA400 and 24BA400 earned a Bronze rating.
4 Features may vary by model.
-
By News Reporter
At the heart of LG appliances lies its powerful Core-Tech, now enhanced with AI capabilities. This technology enables intelligent control of key components, enhancing energy efficiency, ensuring delicate performance and delivering tailored solutions that embody LG’s vision of a Better Life for All.
For instance, LG washing machines feature AI DD, which combines deep learning technology with the company’s 6 Motion Direct Drive technology. This system analyzes fabric types and optimizes washing cycles, utilizing six unique drum motions to provide tailored care for all kinds of fabrics. This not only enhances washing efficiency but also minimizes damage to clothing. However, LG’s commitment to enriching lives extends beyond products. LG offices worldwide actively utilize the company’s laundry solutions to benefit local communities.
In September, Typhoon Yagi ravaged large parts of Southeast Asia including Vietnam. In response, LG Vietnam took action to help the residents of Nam Định and Yên Bái by operating mobile and stationary laundry stations free of charge. This initiative allowed nearly 425 locals to clean approximately 3.5 tons of clothing and blankets.
To handle this significant volume of laundry, LG deployed over 60 employees to operate the washing stations, which were fully equipped with advanced washers and dryers. This ensured that every item was thoroughly cleaned and deodorized after exposure to contaminated floodwater.
This initiative builds on LG’s previous efforts to assist communities in central Vietnam affected by natural disasters in 2020, where free laundry stations across the Quang Binh and Quang Tri provinces cleaned nearly 1,000 kilograms of laundry.
Once this vital campaign concludes, LG Vietnam plans to donate the washing appliances used to educational and medical institutions in Yen Bai and Nam Định, ensuring they continue to serve the community. In addition, the company provided residents in 24 northern provinces with a special warranty from September 12 to October 10, covering repairs for LG appliances and electronics damaged by the typhoon.
In India, LG has embarked on a new business venture with the launch of LG Laundry Crew, a self-laundry service designed for college and university hostels, starting at Galgotias University in Greater Noida this February.
This service delivers the convenience of LG’s washers via the user-friendly “Laundry Crew” application, which facilitates reservations, operations and payments. This first-of-its-kind IoT-enabled laundromat system alleviates one of the biggest challenges of campus life, allowing students to save time for their studies.
To enhance students’ lives, LG India had opened around 100 self-laundry service centers in various college campuses across India and plans to further expand this service to reach 200 self-laundry service centers.
LG is equally committed to enhancing convenience for its commercial business partners. In Thailand, the company has expanded into commercial washing machines with the launch of its first LG Laundry Crew laundromat in February, coinciding with its launch in India. This expansion highlights three key strengths: strong consumer trust in the brand, specialized commercial washing machines and dryers tailored for laundromats and comprehensive after-sales services for store owners.
With Thailand’s flourishing laundromat industry showing significant growth potential, combined with LG’s 35-year market leadership in the washing machine segment, LG Thailand was inspired to introduce the LG Laundry Crew—a pioneering laundromat franchise prototype. As the first official LG-branded laundromat franchise in Thailand, LG stands as the sole provider of commercial washing and drying machines specifically designed for laundromats, enabling entrepreneurs to optimize their investments and reduce operational costs by avoiding oversized equipment.
LG’s established consumer trust and efficient after-sales support system underscore the company’s confidence in the success of this laundromat franchise venture. LG Thailand offers franchise owners an extensive range of benefits, including comprehensive after-sales support featuring complimentary monthly maintenance services for the first two years and bi-annual drum cleaning services to ensure consistent cleanliness and odor-free operation.
More importantly, in response to the recent devastating floods in northern Thailand that particularly affected Chiang Rai and Phayao provinces, LG Thailand launched the “#LGFreeLaundryService” initiative between September 19-30, providing the free laundry service to assist over 1,300 flood victims across three strategic locations in both provinces, helping communities cope with the aftermath of flood-damaged belongings and mud-soaked materials. This initiative exemplifies LG’s core brand promise of “Life’s Good,” demonstrating our commitment to delivering innovation for a better life that extends beyond mere service provision to meaningful community support.
Stay tuned to
link hidden, please login to view to see what other aspects of life the company is revolutionizing around the globe. Contributed by LG Vietnam, LG India and LG Thailand
# # #
-
By News Reporter
Companies to Jointly Develop Total Solutions for Virtual Production and XR Studios
SEOUL, Sep. 9, 2024 — LG Electronics (LG) announces it has acquired a stake in
link hidden, please login to view (Mo-Sys), a market leading developer of virtual production solutions and camera robotics. The strategic seed investment and partnership will expand LG’s capabilities in the virtual production and broadcasting technology segments, enabling it to deliver a more comprehensive lineup of sophisticated hardware- and software-based solutions. Formerly the exclusive province of the movie industry, virtual production studios are becoming increasingly popular with TV broadcasters, and with corporations and educational institutions seeking to create their own content in house. Employing a wide array of advanced technologies, including large-scale LED screens, camera tracking, LED controllers and media servers, virtual production stages have brought a new dimension – and a raft of new possibilities – to the art of visual storytelling.
Renowned for its industry-leading display technology, LG has already established itself in this growing segment, providing its Micro LED and LED screens for both virtual reality (VR) studios and extended reality (XR) stages. Through its newly-signed strategic partnership with Mo-Sys, LG will be able to offer a fuller range of solutions for virtual production and XR studios. As part of the agreement, the two companies will be able to seamlessly support customers who choose to combine LG’s LED displays and controllers with Mo-Sys’s XR products and systems to create a total solution for XR.
“We’re excited by this new partnership, and by the unique value we’ll be able to deliver to customers through combining LG’s mastery of display technology with Mo-Sys’s expertise in virtual production solutions,” said Paik Ki-mun, senior vice president and head of the Information Display business unit of LG Business Solutions Company. “LG will continue to pursue collaboration with partners to strengthen its capabilities as a provider of B2B solutions and innovative experiences.”
Michael Geissler, CEO of Mo-Sys Engineering, commented, “We are delighted to have LG’s support as we continue to innovate in the field of next-generation virtual production technology. Their investment will enable us to enhance our R&D efforts, drive sustainability, and create more efficient production solutions.”
LG virtual production solutions will be on show at the International Broadcasting Convention (IBC) 2024 in Amsterdam, the Netherlands (September 13-16). For more information, visit .
# # #
-
By ironmonkey
Just bought an LGLED-65UJ630 65INCH TV. Right away I started to get the message "This app will now restart to free up more memory". After searching the internet and forums, I now understand that this problem is huge, it has been going on for years now and it is right across many models of LG TV's.
I have tried everything to fix this problem. It has the latest firmware. I did the factory reset and that lasted 4 hours before I got the message back. I turn off the TV and leave it for 10 minutes, maybe one hour later I get the message. I delete browsing history, maybe 10 minutes and I get the message..... you get the message.
As I understand it, the problem is that LG TV's don't have enough internal memory, but they have shipped a ton of their "smart" TV's with this problem.
My question is, has anybody heard anything from anybody, anywhere about a solution to this problem. I really want to keep this TV, but it is not fit for purpose in this state.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.