C9 Update - 05.10.04 - Can no longer connect to Dolby
-
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By FranzBittner
I received an update 05.40.45 for my LG 65UM7510PLA TV a few days ago. After I tried to edit the channel list with the ChanSort programme, I noticed that the channel list transferred from the TV to USB was greatly reduced.
This was not a problem with the previous version 05.40.20. Unfortunately, it is not possible to upload the old version via USB.
-
By Stephen Davies
As above! All4 & My5 will no longer work. Also, how do you update the browser? My LG nano TV is just over 3 years old.
-
By WLSI
I would like to update the OS on a relatively old TV (manufactured in 2015). So there are questions: how to find your version, where to download a new one and check its compatibility with my TV?
-
-
By Brianco
Hello
We have an LG55UQ75006LF 2022 model. Until recently we were getting Dolby Atmos on our Creative soundbar. This was via Disney+ as well as numerous clips on YouTube. Now only Dolby Digital plays. We haven't altered any settings, so cannot understand what has happened. There has never been an option for Dolby Atmos in the TV settings, so assume it was some kind of pass through.
Any advice would be greatly appreciated. Thanks
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.