- 0
-
Similar Topics
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By RJ Fischer
New LG 55" C4, Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model.
-
By hollean
I've just purchased an OLED48 C44 LA which comes with a US 60T soundbar. I've connected the soundbar to the HDMI earc socket. Because my hearing isn't too good I'd like to also have some heaphones plugged into the 3.5mm socket so that both the hdmi earc and 3.5mm socket have sound simultaneously. I've been into accessablity menu and the listen together option doesn't appear to offer both hdmiearc and 3.5 mm simultaneously. Has anyone found a solution to this problem?
just to be clear, There is a setting which permits TV speakers plus wired external headphones. I just haven't found a setting which allows HDMI earc soundbar plus wired headphones.
-
By DeeDeee
Wondering if anyone has any knowledge of, or opinions about, the best soundbar to go with a 55" C4, fir clear dialogue?
-
-
By Regis Wheeler
Apparently, the LG model OLED55CSPUA has an issue with the external device power on/off control. I can configure the IR Bose soundbar well enough, as setup sequence tests it good to control soundbar power. but after exiting the setup, when i press the external device power button on the remote, the TV just wants to cycle through the setup again. It doesn't toggle soundbar power, just cycles back to the setup. i have tried factory settings reset and verified that there are no other devices on the TV.
-
Question
RJ Fischer
Klipsch soundbar model Cinema400 volume (on/off OK) cannot be controlled using current Magic Remote. Also Klipsch is releasing newer model 1200 soundbar.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.