Quantcast
Jump to content

Follow along to stay updated on LG's latest launches!
  • 0

LGSM8100 - 05.20.08 don't memorize quick access after TV restart

Cedric

Asked by Cedric,

 Share

Question

Cedric Apprentice

Cedric

Posted
Posted

Hello,

Since my TV updated to the last WebOS firmware 05.20.08, quick access key (Long Press 1 for HDMI1, Long press 2 for HDMI2) are reset each time i shutdown the TV, and i have to set them after each reboot...

I tried to restore the factory default settings on the TV to see if there is any change, but sadly this didn't fixed my problem.

Any idea please ?

9 answers to this question

Recommended Posts

  • 0
Jokin Uribe Newbie

Jokin Uribe

Posted
Posted

Hi ..

i have  same problem here in a LG 43UM7400PLB after update las week.

I thought i was the only one had this problem.

I made a report to LG spain, I'm waiting for a response..

Regards..

Jokin

 

 

  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted

I am almost sure here is the best place to report this type of bugs, it is a WebOS problem after all...

I wonder if it would be possible to downgrade from 05.20.08 to 05.20.07 ?

  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
2 hours ago, Jokin Uribe said:

Sorry Cedrid, It's not posible.

thats LG support crew in Spain told me..

..

I heard the almost the same thing, downgrade is possible but not without breaking the warrant.
I hope WebOS will release a patch soon enough.

 

 

 

 

  • 0
Jokin Uribe Newbie

Jokin Uribe

Posted
Posted

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
On 2/20/2022 at 9:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Thanks,

 I will try

  • 0
Cedric Apprentice

Cedric

Posted
  • Author
Posted
On 2/20/2022 at 9:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Tried and it don't work...

By the way I disabled  "TV Quickstart" setting after the TV factory reset (Have you done it too ? ).
With TV Quickstart enabled, the quick access settings are in memory even if I shutdown the tv (normal after all, because the TV is not really shutdown).

Before the last LGWEBOS patch 05.20.09, even with TV "quick star / fast start" setting  disabled my quick access settings were correctly memorized even after the TV reboot. This is no more the case.

I really hope LG/ Webos will correct the problem or at least permit us to downgrade the firmware.

 

  • 0
Padraic Doyle Newbie

Padraic Doyle

Posted
Posted
On 2/20/2022 at 8:43 PM, Jokin Uribe said:

Hi all...

First of all, sorry for my poor english..

At last i found a solution for the 'quick access bug' in my 'LG 43UM7400PLB' tv..

I made a backup of my tv channels setup in fat32 formated pendrive.

Deleted all my quick access bookmarks.

Unpluged all my hdmi devices.

restored tv factory settings from setup menu.

plugged all my hdmi again.

test quick access again... 

remap al hdmi quick access entries..

turn off tv.

turn on tv, check quick access.

it worked !!!

restore tv channels from usb drive.

Lg service sent me an update, i applyed it but did'nt work until i restored factory settigns.

That was the solution..

At lastttttttttttttt..

Cheers!

Jokin

Has your change actually survived a Sofware Update ..  as I read it you have simply set up your Quick Access assignments again. My problem is they get wiped out on every Software Update and I then have to set them up again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • PVD
      Date problem after 03.51.15 update
      By PVD
      After recent software update of LG OS software update 03.51.15, there is constant problem with Date.  Date is not setting properly and getting defaulted, due to which browser and most of the apps are not working.. Have tried to reset to original settings and remove automatic date setting option then tried setting manually.. but every day its resetting to old date.
    • mean2
      Last input behavior changed after update
      By mean2
      Hello, after the last update of WebOS (6.5.0.-24) there is different behavior of returning back to previous input on my TV. When I was watching a Live TV and opened an app like Youtube, after closing it (holding the return button) it used to return to Live TV. The same with HDMI input, when I was playing on Playstation and the opened an app, after closing it it returned back to PS. Now after the update, it always go to the Home Screen when the app is closed. I only found in setting to return to last input when turning the TV on instead of Home Screen, but didn't find the same for the behavior after closing an app. Is there a way to fix it?
      Thanks
    • Roy Brown
      Sky News stopped working after the webOS update
      By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • JRay
      LG TV won't work after update
      By JRay
      Our TV just did an update and now certain buttons on the remote aren't working, and the TV won't stay on if it even comes on at all you get a dark blue screen and that is it.. such a great update. Now what do we do? The remote batteries have been changed and it still isn't working correctly. We unplugged the TV and then replaced it in.. ugh.. 
    • Get More For Your Device
    • SHawk
      OLED65G2PSA damaged after recent webOS firmware upgrade
      By SHawk
      Immediately following the major LG webOS firmware upgrade last week, our OLED65G2PSA is damaged. A white line appears top to bottom of screen in from the left hand side & the tv either fails to turn on, or shuts itself down shortly after. Has anyone else had this issue & if so, has any update on a solution. (I'm waiting for LG to get it sorted. Waiting ...)

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...