Quantcast
Jump to content

Follow along to stay updated on LG's latest launches!
  • 0

Apple TV app with DNS over TLS doesn't work

SimonW

Asked by SimonW,

 Share

Question

SimonW Newbie

SimonW

Posted
Posted

WebOS 05.20.15

DNS over TLS active on router (Cloudfare), all apps (like Netflix, Prime Video & HBO Max etc) are working fine, but the Apple TV app times out (no network)
Removed the app, installed it again, but still not network. Turned DNS over TLS off, Apple TV works fine.
According to Apple it's a LG (WebOS) issue, the only requirements, they say, are "active internet connection" and "no VPN".
Also tested with Apple TV on a Fire TV Stick (on same network) and there it's working fine wiht DoT.  Unfortunately Fire Stick is not 4K, so app on TV is preferred.

Look to me issue is with the Apple TV app itselfs, but Apple says it's LG.

Anyone got some suggestions?

2 answers to this question

Recommended Posts

  • 0
Zeg-1244 Newbie

Zeg-1244

Posted
Posted

Same issue on my C8. Had my router configured with DNS over TLS (also Cloudflare). Resolved by turning it off.

It's the only app on my LG TV that has this issue. Shame that we have to sacrifice important security features in order to get Apple TV to work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Similar Topics

    • David Daul
      Factory Reset, Remote Won't Work, Stuck on Press the OK button(wheel) on your remote (55NANO81ANA)
      By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • Horniak
      BUG: RTSP unplayable without 3rdparty equipment, Should work with ease according to LG.
      By Horniak
      BUG: Impossible to play an RTSP stream directly to LG WebOS.
      According to LG it should work:
      link hidden, please login to view "● Real-time Video Streaming
      WebOS supports various IP video streaming protocols, including RTSP/RTP/HLS and UDP Multicast, for live streams. Its excellent capacity for content playback facilitates easy management of real-time video content."
      ------
      After reading friggin everywhere, and on this forum, there is no easy way to do this without external products. I own 2 LG oleds, one 77" c1 and one 55" c4. And the c4 was bought with this usecase in mind.
      So, how do I open an rtsp:// stream on WebOs?
      Thanks
    • CJ Catalano
      Can't get ARC to work properly
      By CJ Catalano
      Hi All, I just purchased a 75QNED85 and have a question about the ARC function. I have the tv hooked up to an older Denon AVR (2112ci). My cable box (FIOS) is connected to HDMI 1 on the TV. The Denon is connected from its HDMI Out (ARC) port to HDMI 3 on the TV (ARC/eARC). The tv has the ability to configure the Sound Out over HDMI to PCM, Auto or Pass-Through. If I select either Auto or Pass-Through the Denon sort of recognizes it as a Dolby Digital signal but just plays a sort of chirping/clicking sound. If I change the setting to PCM it works, but it only seems to be passing a 2.0 signal as the Denon reverts to a ProLogic surround mode. I didn't try connecting via the optical port because I already have something connected to the Denon's optical input. Anybody have experience with this? Should the PCM setting be able to output a full 5.1, 7.1 signal? 
    • JRay
      LG TV won't work after update
      By JRay
      Our TV just did an update and now certain buttons on the remote aren't working, and the TV won't stay on if it even comes on at all you get a dark blue screen and that is it.. such a great update. Now what do we do? The remote batteries have been changed and it still isn't working correctly. We unplugged the TV and then replaced it in.. ugh.. 
    • P.T.
      USB HDD that will work on my TV
      By P.T.
      I have a LG G3 Oled Tv 65 inch. I  want to record Tv programs using the correct USB HDD . Could some one out there give me some specifics of  a USB HDD that will work on my TV .
      Thank You in anticipation of a reply .
      Peter 

  • Similar Tagged Content

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...