- 0
-
Similar Topics
-
By victoranthony
Hey everyone,
I have had LG TV for just two years. Last weekend, when I turned it on, it showed a blank white screen but was still illuminated, with sound working. No LG logo or image appeared. I unplugged the TV and held the power button for 30 seconds while it was unplugged, and the screen issue fixed the issue for a week[url=https://whitescreen.vip/
].[/url]
However, the same white screen problem has now returned, and the power reset trick no longer works.
Should I contact a local TV repair technician or reach out to LG customer support first? Any advice?
-
By Miguel Gonzalez
I am lifetime LG CUSTOMER.
I have a fridge, air conditioned etc. all with THINQ can be accessed remotely (WAN ACCESS)
Some years ago I purchased 65UM7100PLA but this device is accesible only in LAN/WLAN via THINQ
I though this is because old WEBOS version, but I have purchased a new 32LQ63006A with WEBOS22 and I am not able to acces the TV via WAN. It,s the same. THINQ works only in LAN, at home
I question if there is any way to remotely (WAN) access to my TV,s???
This can be for security reasons (turn on /off away home etc.
If fridge, air conditioned can be accesible by WAN whyy tv not????
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By denisuu
Hi all,
I'm wondering how you can get into the service menu (In Start) on an old LG Smart TV (42LB630V) running WebOS 1.4. I have a Samsung Galaxy S6 (SM-G920F) with a IR blaster, I have tried sending '0x04FB 0xFB04' to I which should be IR code to enter the menu, but that doesn't work.
I have also tried entering it with the SSAP-Web, but I get:
error: 500 Application error {"errorCode":-101,"returnValue":false,"errorText":"\"com.webos.app.factorywin\" was not found OR Unsupported Application Type" The SAPP-Web app does works though, because the TV does respond to Get info
{ "returnValue": true, "product_name": "webOS", "model_name": "HE_DTV_WT1M_AFAAABAA", "sw_type": "FIRMWARE", "major_ver": "05", "minor_ver": "05.90", "country": "omitted", "device_id": "omitted", "auth_flag": "N", "ignore_disable": "N", "eco_info": "01", "config_key": "00", "language_code": "en-GB" } The reason I want to access the menu is because I've enabled DEBUG mode on my TV through the NVM method and I want to enter a root shell trough UART to enable SSH and root access.
Gaining root access through NVM:
link hidden, please login to view 
-
By delos
Hey everyone,
I'm new here, so first of all, hello I'm delos.
I own two LG OLED55G19 TVs, one at home and one elsewhere. At home, I have a QNAP NAS (TS451) with DLNA functionality. Accessing it at home works great.
The "Home" and "External" networks are connected via VPN. Thus, both networks have different network addresses.
Now I want to access the home network from the external network with the LG via VPN in order to integrate the DLNA server. The LG doesn't "see" the external server because it's not in the same network. However, I wonder why you can't just enter the IP address of the server in the LG.
Does anyone have a solution?
Many greetings
delos
-
Question
BVinDR
LG 43UQ7590 used as photo display. Put it into Hotel Mode and set IR Operation to Block All. This is to prevent the photo display from responding when I turn my main LG TV in the same room on and off. All OK. Then wanted to turn off Hotel Mode so entered the 1-1-0-5 sequence again. But did something wrong as now the Quick Access settings menu comes up. I can't exit that menu since the remote is blocked. Tried unplugging TV for a day - still the Quick Access menu comes up. Tried inserting a USB drive with updated firmware for the TV but can't select the Yes/No options to continue the update. Is my only hope getting a service remote? Thanks much.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.