PreCentral: Know your gestures: Power (two finger) Scroll
-
Similar Topics
-
By Bidhu
[URL=https://datingnow.site]Casual Dating: Find New Connections Tonight in Your City[/URL]
Find Sexy Womans in your town for night
https://datingnow.site -
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By pivotCE
I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
link hidden, please login to view. Stuff You’ll Need
Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
1. A 4-wire micro USB to USB A cable
2. and 1/4 watt resistors (1 each per cable)
3. Soldering iron and solder
4. Heat shrink or electrical tape
If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
1. A 4 wire USB C to USB A cable
2. Items 2-4 above
If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
1.
2.
3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
4. Items 2-4 from the first section above
Prepare the Wires
Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
Build the TouchPad Side of the Cable
See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
1. Solder the ground (black) wire to one side of the 300k resistor.
2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
3. Then solder the other end of the 250k resistor to the red (power) wire.
Build the Charger Side of the Cable
If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
Final Thoughts
You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
#webos4ever
The post first appeared on . Related posts:
-
-
By News Reporter
At LG, the philosophy of Life’s Good revolves around promoting positivity and encouraging individuals to adopt an optimistic outlook on life. In alignment with this mission, the company launched the “Optimism your feed” campaign earlier this year. This initiative aims to break the cycle of negativity often perpetuated by social media algorithms, infusing online spaces with a refreshing wave of lighthearted cheer.
The “Optimism your feed” playlist features a wide collection of original content aimed at uplifting spirits and spreading hope. By engaging with this playlist, users can teach the algorithm to curate their feeds with similar positive material. Within just three weeks of its launch, the playlist amassed over 1.2 billion views across various social media platforms, demonstrating its widespread appeal and resonance with audiences around the globe.
While this campaign seeks to inject positivity into social media, traditional broadcast news often focuses on more serious narratives. In Mexico, for instance, news outlets frequently spotlight stories of violence and organized crime, fostering an atmosphere of sadness and anger that can overshadow positive messages. To counter this trend and promote the brand promise of Life’s Good through traditional media, LG Mexico partnered with Milenio Television, the country’s largest TV news network, to launch a local campaign series titled “Good News Is Also News.”
To date, the series has showcased eight true stories of resilience and hope, reminding viewers that there is more to life than negative headlines. Good news exists – and it deserves to be shared. Filled with optimism and love, this initiative has resonated with the public, garnering views and positive feedback across social media and the network’s streaming platforms.
The premiere episode features the inspiring journey of two members of the “Pinche Gringo BBQ” team, illustrating how passion and determination can turn dreams into reality. The second installment highlights a street juggler from Mexico City, known as “Corbatín,” who shares his own uplifting story.
The third episode introduces Violeta, a teacher at the LG-supported NGO “Villa de las Niñas,” who, despite facing personal loss and hardship, bravely confronts challenges and embraces the future. Following this, the fourth story, “Just Good News,” emphasizes the power individuals have to fill their social media feeds with positivity and joy. This episode aligns with the global “Optimism your feed” campaign, focusing on how algorithms can be trained to deliver uplifting stories when viewers choose to engage with positive content.
The fifth episode, titled “Seres Libres,” spotlights an animal sanctuary in Mexico City dedicated to rescuing and caring for abandoned and mistreated animals. This story illustrates how the Life’s Good message extends to all living beings, underscoring the importance of compassion and care for the natural world.
The sixth and latest installment tells the story of Litine, a Haitian migrant who arrives in Mexico in search of a better life. His journey exemplifies how brave optimism can help overcome obstacles, as he continues to pursue his dreams with a positive mindset while working at a convenience store.
Through nationwide broadcasts, Milenio Television has shared the optimistic message of Life’s Good with over 350 million people. This partnership encourages locals to embrace a positive outlook and apply the “Optimism your feed” initiative to all aspects of life – because, indeed, Life’s Good.
Contributed by LG Mexico
# # #
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.