LG Launches Micro LED Display for Virtual Production Studios
-
Similar Topics
-
By Seppel
Hi,
i am in the process of purchasing several LG digital signage displays and need some more information before i place
my order.
I need a function like kiosk mode to start a website in full screen mode on device startup.
The device would be a LG 43UH5N-E installed is webOS.
Is this posswible with the onboard functionallity of webOS or do i need a 3rd Party App ore something?
There is no need for a pagerefresh or such things, only display of es simple Website.
thx for help me out.
-
By pivotCE
Well, it’s 2024 and technology continues to advance. The TouchPad isn’t new by any means, but that doesn’t mean it can’t be slightly modernized to be more convenient today. Specifically, it is entirely possible to convert the TouchPad’s Micro USB port to USB C for charging and USB storage access. I’ll show you how.
This is a tough mod which requires micro-soldering and modifying a PCB which you will have a hard time sourcing a replacement for without buying another TouchPad. Proceed at your own peril.
Tools for the Job
To do this mod you’ll need a few things for tools and parts. Here’s a list of what I used:
– Needle nose pliers/tweezers
– USB C boards with 5.1k resistors
link hidden, please login to view
– Soldering iron, solder, flux and a hot air station
– Flush cuts
– Dremel with cutting or sanding wheel
– 28 AWG wire or smaller. 30 AWG is pretty good but any wire around 0.25mm to 0.5mm should work.
– Small file and screwdriver set
– Painter’s and kapton tape
– Metal spudger Disassemble the TouchPad
This is where you’re going to want to get that metal spudger out and be very careful not to snap clips. I can’t explain it better than iFixit already did so go check out their and then come back here.
Modify the USB Connector Board by Removing the Micro Port
There are a few ways to remove the Micro USB port. I added a bunch of flux and coated all the connectors in fresh leaded solder and then used a hot air station set to 800 degrees while wiggling the port very slightly with needle nose pliers. You don’t have to be particularly careful here so if you want to cut the port off with the dremel or the flush cuts or just rip it off with the pliers, (I don’t recommend it but…) that’s fine. We’re not using the pads it’s soldered to anyway. You should STILL be careful not to crack the board. Go slow. Be patient.
Trim the USB C Board
We need to expose the USB C port a bit on this board so let’s cut it down. Grab the painter’s tape and flip the USB C board upside down. You’ll see a small trace between the front and rear anchor points on the right side, which we don’t want to cut. Mark the tape just on the other side of that trace like I did. Dremel along the tape line until you get to the port. You can then use needle nose pliers, a flat file, and/or flush cuts to remove the rest of the board from the bottom of the port.
Prepare the USB Connector Board for the USB C Port
We need to slide the port into the old space so grab the painter’s tape again and mark off the area I marked to make room for the USB C port. You can place the port up to it like I did and use that as a guide. Grab your dremel again or a similar tool and cut out what you marked off. When you’re done, the USB C port should slide easily into the groove. It will fit tighter when we add the kapton tape in a later step.
Make Room in the TouchPad for the Added Thickness of the USB C Board
The USB C board will sit underneath the USB connector board so we have to make room by trimming away the plastic underneath. For this you’ll need to use flush cuts or any other tool you have to chip away. You could use the dremel for this if you’d like. Be careful to not go beyond the first inner layer. Beyond that is the outer shell of the TouchPad. There’s no real method here, just cut out the screw posts and chip away. Use the pictures below as a guide.
Cut the USB C Hole from the Old Micro USB Hole
To open the micro USB hole enough to fit the USB C port, take a rounded file to the left and right of both sides and just file a little bit at at time. Use a small flat file to widen the top and bottom of the port. This process is just trial and error. File a little and then grab the USB C board to test. The port will need to fit inside the hole a bit so you can push it through from the outside to test the hole size if that’s easier. Note: the USB C board will likely not rest on the bottom of the TouchPad and will float a little. This is good because it makes room for your wires and a little kapton tape underneath.
Tape the USB C Board
Since we hacked away at the USB connector board it’s possible we’ve provided the perfect environment for creating shorts! Oh no! So get out the kapton tape because we’re going to add a layer on both sides. You’ll see how I did it on one side below. Do it on both sides. You’ll also notice how I did not cover those two small square contacts just at the bottom of the tape. That’s because we need them.
Where To Get Power and Data
You’ll see the diagrams below which I’ve marked with VBUS (power), data in, data out, and ground. Obviously the old port is gone and most if its pads, but I wanted to show that both sides of the board have the connections. You could possibly do this mod differently, and if you so choose, hopefully these help.
A quick note: this mod can be done with a 4-pin USB C port. That would give you power and data just like with the USB C board I’m using in this guide, however, a 4-pin USB C board will not charge with a USB C charger (ie USB 3.1). The board I’m using in this guide provides the ability to use any charger because it comes pre-built with 5.1k resistors wired to CC1 and CC2 to ground. This is the trick that tells the USB C chargers to send power to the device.
Solder the USB C Board into the USB Connector Board
This isn’t a “how to solder tutorial” so hit up youtube and find a good tutorial that works for you. In general though, use flux, pre-tin the VBUS, Ground, D-, and D+ pads on the USB C board as well as the points on the bottom of the USB connector board.
Now for the tricky part, I didn’t list it in the Tools section above, but it would really help to have magnification or a digital microscope for this. I have these things and I used both. You might have steadier hands and better eyes than me. The picture below was my first attempt of the three TouchPads I modded, and it’s not my best soldering work, but fundamentally, this is what yours should look like.
Put the Pieces Together
You can use a bit of kapton tape to secure the wires in place a bit more if you’d like but it’s not required. It won’t short since it’s only plastic underneath. This is all press fit into place, but if you’re uncomfortable with that, you can add a little hot glue under the board as you put it back into the TouchPad. You don’t have to put the metal shield back into place if you don’t want to. It’s all a pretty tightly fit and if you find the TouchPad screen isn’t as flush as you want, just leave the metal shield off. A little kapton tape right on top would be fine instead.
Congrats, You Now Have USB C
I did this mod on three TouchPads and each one works fine with any USB charger I could find, including USB C port having USB 3.1 chargers. I can also confirm the data connection works just like it should to connect via USB mode on PC. Sadly, this doesn’t do anything to stop webOS from telling you the charger you’re using isn’t the original TouchPad barrel charger, but you can make a custom cable to stop that which I’ll cover in a future article on pivotCE.
#webOS4ever
The post first appeared on . Related posts:
-
By News Reporter
Between September 6-10, LG showcased its diverse range of AI-powered home solutions, opening a new chapter of intelligent home living at its IFA 2024 booth. Under the theme of Experience, Affectionate Intelligence (AI) Home, the company presented its unique, AI-inspired vision of future living to visitors from around the world.
Designed in collaboration with Korean science fiction author Kim Cho-yeop, the expansive booth featured diverse experience zones curated to demonstrate how the company’s AI can be embedded into home life to elevate lifestyles in intelligent and distinctive ways.
Upon entering Hall 18 of Messe Berlin, visitors were greeted by the AI Home Gate, a massive LED media wall displaying the journey of LG AI, from the birth of LG’s AI Agent, FURON, to how it communicates with the world and enriches daily life.
After gaining a solid understanding of what Affectionate Intelligence is all about, visitors could explore how it makes everyday life more simple and convenient. Divided into several distinct lifestyle spaces, LG’s booth showcased how natural conversations with
link hidden, please login to view, can help manage every aspect of daily routines.
The first lifestyle space, “Second Youth Home,” showcased a new and more active lifestyle for retirees. The digital signage on the wall visualized how ThinQ ON customizes and takes care of home appliances depending on the user. For example, after recognizing certain phrases like “tennis lesson” on the user’s calendar, ThinQ ON automatically sets the washer and dryer to its “Activewear course” via Smart Pairing.
, employs AI DD technology to intelligently minimize water and energy usage based on each load. It also features Easy Control technology, which automatically selects cycles according to usage patterns and user preferences for maximum convenience.
The second lifestyle space, named “Smart Green Home,” showcased the ideal abode for families passionate about the environment and energy conservation. Among the many power-saving solutions on display, LG’s AI-enhanced Energy Storage System (ESS) analyzes energy usage patterns and weather forecasts to adjust its mode according to various conditions. Another highlight was the . With these devices – both inside and outside the home, connected to ThinQ ON – LG AI optimizes household energy usage in real-time and reduces energy bills by intelligently managing the power consumption of every connected device.
The next lifestyle space was the “Affectionate Home,” designed with children and pets in mind. It featured the company’s Self-Driving AI Home Hub, which can move freely around the home and interact with children through conversation. Its multi-modal sensing combines voice, sound and image recognition to change its expression according to various emotions, allowing it to respond to different situations with appropriate etiquette. The hub can move from room to room and control connected appliances and IoT devices, constantly making sure the environment is optimized for the little ones.
Not just a hub for home appliances, LG AI is an Affectionate Intelligence storyteller that boasts a deep level of emotional depth and understanding, enabling it to communicate and interact with users effectively. Through generative AI, the Self-Driving AI Home Hub can develop stories based on images drawn by the user, ensuring a unique bedtime story every night.
The next room demonstrated how LG appliances optimize the environment for pets and their owners. Once temperature and humidity sensors detect indoor air conditions, the LG DUALCOOL air conditioner can achieve the perfect temperature with airflow customized to suit the environment and personal preferences.
This zone also featured the AeroCat, a purifier designed specifically for cats. As every cat owner knows, cats love to sleep on devices and appliances. With this in mind, LG AeroCat can detect when a pet sits on top of it, stopping operation to provide a quiet place for a nap. And since weight can be an important indicator of heath, the AeroCat’s built-in weight sensor tracks the pet’s weight and alerts owners of any unusual changes via the ThinQ app.
“Delightful Home,” the final lifestyle space on display, presented a perfect setting for inviting and entertaining family and friends through a shared love of food. This zone highlighted LG AI’s ability to make cooking easier and quicker, with ThinQ ON providing menu recommendations and step-by-step instructions for numerous delicious dishes. Visitors could even learn some new skills by watching the “AI Talking Cooking Show,” a live cooking demonstration by chef Kristof Mulack, a culinary master who knows the best ways to customize LG’s AI appliances.
To let visitors focus on the technology that makes all these lifestyle spaces possible, the company also set up the “LG Affectionate Intelligence” zone. This area effectively illustrated the connectivity and expandability of the Matter-certified LG ThinQ ON, engineered to help users manage their entire smart home with a single device.
LG also shined a light on its AI legacy with a special “AI to the Core” space. Using a transparent OLED display, the company explained how its Core Tech has evolved into LG AI core tech. This lineup includes revolutionary AI DD and AI DUAL Inverter, both of which employ AI to enhance performance and deliver more precise control, resulting in new and improved levels of customer care and user experiences.
The final zone by LG was none other than the “Sustainability Lounge,” which provided visitors with an overview of the company’s latest efforts to promote sustainable living. Here, visitors could relax while learning more about LG’s ESG activities, including its use of recycled plastics in select products.
LG’s booth at IFA 2024 successfully delivered an insightful window into the LG AI Home. Stay tuned to to explore how LG AI can enrich daily life in the new era of AI.
# # #
-
By News Reporter
Companies to Jointly Develop Total Solutions for Virtual Production and XR Studios
SEOUL, Sep. 9, 2024 — LG Electronics (LG) announces it has acquired a stake in
link hidden, please login to view (Mo-Sys), a market leading developer of virtual production solutions and camera robotics. The strategic seed investment and partnership will expand LG’s capabilities in the virtual production and broadcasting technology segments, enabling it to deliver a more comprehensive lineup of sophisticated hardware- and software-based solutions. Formerly the exclusive province of the movie industry, virtual production studios are becoming increasingly popular with TV broadcasters, and with corporations and educational institutions seeking to create their own content in house. Employing a wide array of advanced technologies, including large-scale LED screens, camera tracking, LED controllers and media servers, virtual production stages have brought a new dimension – and a raft of new possibilities – to the art of visual storytelling.
Renowned for its industry-leading display technology, LG has already established itself in this growing segment, providing its Micro LED and LED screens for both virtual reality (VR) studios and extended reality (XR) stages. Through its newly-signed strategic partnership with Mo-Sys, LG will be able to offer a fuller range of solutions for virtual production and XR studios. As part of the agreement, the two companies will be able to seamlessly support customers who choose to combine LG’s LED displays and controllers with Mo-Sys’s XR products and systems to create a total solution for XR.
“We’re excited by this new partnership, and by the unique value we’ll be able to deliver to customers through combining LG’s mastery of display technology with Mo-Sys’s expertise in virtual production solutions,” said Paik Ki-mun, senior vice president and head of the Information Display business unit of LG Business Solutions Company. “LG will continue to pursue collaboration with partners to strengthen its capabilities as a provider of B2B solutions and innovative experiences.”
Michael Geissler, CEO of Mo-Sys Engineering, commented, “We are delighted to have LG’s support as we continue to innovate in the field of next-generation virtual production technology. Their investment will enable us to enhance our R&D efforts, drive sustainability, and create more efficient production solutions.”
LG virtual production solutions will be on show at the International Broadcasting Convention (IBC) 2024 in Amsterdam, the Netherlands (September 13-16). For more information, visit .
# # #
-
By News Reporter
Kinetic LED signage has transformed how viewers interact with content, emerging as a new method of visual storytelling. Recent technological advancements have forged the way for the brilliance of traditional LEDs to come together with kinetic art technology, creating three-dimensional (3D) displays that exude vibrant colors and dynamic sounds for an enhanced visual experience.
Kinetic LED signage has become a standout choice for artistic exhibits in public spaces, adding dynamic movement to museums, hotel lobbies and galleries. By displaying animated patterns that seem to emerge from the screen, this innovative signage solution adds a sense of realism to the space that conventional displays cannot replicate. When combined with vivid colors and sound effects, it seamlessly integrates into a wide array of spaces, effectively showcasing diverse content from compelling advertisements to stunning works of art.
The Sangsang Platform, a cultural complex in South Korea remodeled from an old granary to host various cultural activities, features the gigantic LG Kinetic LED façade as a breathtaking centerpiece. In addition to mesmerizing visitors, the signage solution heightens the ambiance and effectively modernizes the space with dazzling media art displays. Renowned for its size and cutting-edge technology, the LG Kinetic LED signage immerses audiences with its dynamic presence.
Measuring a massive 3 meters wide by 5 meters long and powered by 240 engine motors, images in the LG Kinetic LED signage come alive in vivid detail with the support of High Dynamic Range (HDR). By synchronizing with 240 LED modules that move delicately back and forth up to 300mm, HDR defies the challenges of traditional flat signage to create 3D content, enhancing the sense of immersion and transforming kinetic motion into a work of art. In addition, with customized digital media and sound, the signage delivers realistic audio and motion for an unforgettable sensory experience.
From lobbies to shopping malls to public squares, the LG kinetic LED signage creates an impactful visual effect in indoor spaces. This Kinetic LED as a media platform can maximize the impact of advertising by effectively capturing people’s attention. What’s more, LG Kinetic LED signage offers a bundled software package for buyers, enabling easy application of kinetic motion utilities and eliminating concerns about implementing additional art technology services.
The dynamic media façade of the LG Kinetic LED signage is set to mesmerize viewers and satisfy stakeholders alike, demonstrating LG’s commitment to delivering total service that includes space design, installation and post-management of the LED signage, all of which elevate the customer experience and optimize operational efficiency.
To learn more about LG’s Kinetic LED signage, visit
link hidden, please login to view. # # #
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.