Start page, When you turn on your smart TV, the TV immediately switches to terrestrial TV hdmi
-
Similar Topics
-
By Bidhu
[URL=https://datingnow.site]Casual Dating: Find New Connections Tonight in Your City[/URL]
Find Sexy Womans in your town for night
https://datingnow.site -
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By News Reporter
Company Enhances Smart Home Connectivity With Open API
SEOUL, Dec. 17, 2024 — LG Electronics (LG) has fully opened the Application Programming Interface (API) of its smart home platform, LG ThinQ, enabling developers to easily create smart spaces with LG appliances.
Recently, LG launched the LG Smart Solution API Developer website (
link hidden, please login to view) to officially open up the LG ThinQ API. An API acts as a digital connector that allows different software to exchange functions seamlessly. Developers can utilize the open API to integrate various features from LG AI appliances into their programs or systems, enhancing their services. The LG ThinQ API is divided into two categories: the ThinQ API for individual users and the ThinQ Business API for corporate partners. The ThinQ API allows for remote control of LG devices installed in homes or buildings and facilitates integration with various platforms.
For individual users, the ThinQ API supports the control and monitoring of AI appliances registered in the LG ThinQ app from various smart home platforms. By utilizing the ThinQ API, anyone can easily create a customized smart home that fits their lifestyle. For example, users of the global smart home platform Home Assistant can now connect and control 26 types of LG AI appliances, including refrigerators and washing machines, within their existing smart home environment. Home Assistant is a community-based open platform with about one million users worldwide who collaboratively develop various smart home functions such as device automation and feature expansion.
For enterprises, the ThinQ Business API supports partners operating office or residential buildings in integrating and managing various LG products, from appliances to commercial equipment like HVAC and signage, with their existing apps. For instance, large residential buildings can integrate LG appliances with their existing management apps for more convenient use. Residents can reserve the use of LG washers and dryers in common areas through the building management app, or administrators can detect abnormal conditions in the building using LG’s temperature and humidity sensors and quickly respond to issues through alert functions.
Meanwhile, LG has accelerated the integration of external products and services into the LG ThinQ platform by acquiring the smart home platform company Athom, known for its extensive IoT device connectivity. Athom’s smart home hub Homey currently connects over 50,000 types of appliances and IoT devices, and the Athom app store features around 1,000 apps that connect and control products and services from global brands like Philips and Aqara. LG plans to integrate Athom’s extensive open ecosystem and IoT device connectivity into the AI home hub LG ThinQ On, aiming to realize an AI home where generative AI better understands customers and provides optimal space solutions.
“With the official launch of ThinQ AI, we aim to deepen engagement with open-source community smart home power users in the open-source community and broaden our collaboration with B2B partners. This initiative will bolster our efforts to create smart home ecosystems powered by LG appliances, enhancing customer experiences across multiple touchpoints,” said Kim Kun-woo, vice president of LG’s Home Appliance Solution Company.
# # #
* The main image is demonstrating potential use of the LG ThinQ API. Actual use may vary.
-
By pivotCE
I’m pretty sure it’s safe to say there are more HP TouchPads left in the world than there are their matching original barrel chargers. This means if you have a TouchPad today, you’re probably using a TouchStone, a computer, or any other random USB A charging brick to (very slowly) charge your 13 year old device. And it means you’ve seen the error message in the image above every time you’ve plugged it into anything other than the original barrel charger or a computer. Fun fact, you can trick the TouchPad into charging normally and not feeding you the message by creating your own custom micro USB or USB C cable if you’ve
link hidden, please login to view. Stuff You’ll Need
Assuming you have a micro USB (ie. non USB C modified TouchPad) you’ll need:
1. A 4-wire micro USB to USB A cable
2. and 1/4 watt resistors (1 each per cable)
3. Soldering iron and solder
4. Heat shrink or electrical tape
If you’re making a USB C cable but only want to use it with a USB A charger then you’ll need:
1. A 4 wire USB C to USB A cable
2. Items 2-4 above
If you’re making a true USB C to USB C cable that you plan to use with a USB C 3.1 charger you’ll need:
1.
2.
3. Any 2-wire cable or a 4-wire cable that you’ll cut the data wires out of (green and white typically) and that you’ll cut the ends from
4. Items 2-4 from the first section above
Prepare the Wires
Regardless of which cable you’re making, the end that goes to the TouchPad will need all 4 wires and the resistors. So grab the 4-wire cable of your choice and strip the ends, and I recommend pre-tinning them with some solder.
Build the TouchPad Side of the Cable
See the image below for how to arrange the resistors. If you’re making a USB A cable, go ahead and cut into two pieces, set aside the USB A side, and grab the micro or USB C for this part.. It doesn’t matter how far away from either end you go, it’s your choice. Strip the wires back so you have enough bare wire to work with.
1. Solder the ground (black) wire to one side of the 300k resistor.
2. Solder data- (green), data+ (white), the other side of the 300k resistor and one side of the 250k resistor together.
3. Then solder the other end of the 250k resistor to the red (power) wire.
Build the Charger Side of the Cable
If you’re making a USB A cable, then all you have left to do is reconnect power (red) and ground (black) to their corresponding colors on the TouchPad side of the cable, trim off the data lines from the USB A side, clean it all up with some heat shrink or electrical tape and you’re done!
If you’re making a USB C to USB C cable grab the USB C board I linked above and your 2-wire cable (or 4-wire that you’ve trimmed the data lines from). You’ll also have to cut the end off to make room for the new connector.
1. Pre-tin the board on the two outside pads marked as VCC and Gnd in the image below.
2. Solder on the red (power) wire to VCC and then black (ground) to Gnd. If you bought the housing and boards together, don’t forget to the housing on the wire before you start soldering. You also may need some super glue to keep the plastic housing from coming apart.
3. Back at the TouchPad side of the wire, take the other end of your 2-wire cable and attach red and black to their corresponding ends, clean it up with some heat shrink or electrical tape and you’re done!
Final Thoughts
You should now be able to use any charger you want to and the TouchPad will believe you’re plugged into a normal battery charger and will allow the normal charge rate flow through.
Note, you’ve effectively removed the ability to use this cable for Data since the data lines are no longer connected.
Also, for those who modded the TouchPad with USB C, the port already has 5.1k resistance but cannot communicate that to a USB C 3.1 charger with the added resistance on the data lines. This is why the TouchPad end of the USB C cable must be a “dumb” 4-wire USB C cable and the charger end needs the 5.1k resistance to tell the charger on that end to send power. This also means that you must remember which end is which, but don’t worry. Picking the wrong direction won’t hurt anything as the USB C charger won’t allow power since the wire doesn’t tell it to. I marked the TouchPad side of the USB C cable with a dab of orange paint pen.
Finally, I hope you found this helpful or at the very least entertaining! I had fun exploring the different ways of making this work and so feel free to give it a watch.
#webos4ever
The post first appeared on . Related posts:
-
By News Reporter
Discover a World of Art on LG Smart TVs With Artlume’s Rich Collection of
15,000 Artworks, From Iconic Classics to Unique AI Creations
SEOUL, Nov. 28, 2024 — LG Electronics (LG) has announced a new partnership with Artlume, a pioneering digital art and AI platform, to bring inspiring art experiences to the comfort of home through LG Smart TVs. LG TV owners will be the first to enjoy this extensive catalogue on the big screen. With a shared vision to make art accessible at scale, this new collaboration transforms over 200 million LG Smart TVs worldwide into virtual art galleries, offering a broad selection of artworks that enrich the ambiance of living spaces.
Available globally on LG TVs running webOS 6.0 (2020 TV models) and above, Artlume’s expansive collection includes classic masterpieces, contemporary photography, AI art and works from renowned institutions like the National Portrait Gallery in London and the Ashmolean Museum. With over 15,000 artworks available to explore and stream, users can curate personalized playlists via the mobile app to display their favorite art on their LG Smart TVs.
Artlume’s user-friendly features allow instant changes to displayed artworks for enhanced creative control. The platform also integrates AI art generation, empowering users to create and publish unique art with simple word prompts, which can then be proudly shared through the screen.
“LG is the perfect partner for us, aligned with our goal to bring love, beauty and passion to people’s lives through the universal language of art,” said Patrick Ashworth, founder & CEO of Artlume. “We are committed to leaving a profound positive impact on humanity by educating future generations, supporting mental health through the beauty of art, and sharing museum art with the world.”
“LG is dedicated to transforming how people experience art,” said Chris Jo, senior vice president of platform business at LG Media Entertainment Solution Company. “Through this partnership with Artlume, we are bringing a wide array of incredible art to LG Smart TVs, enriching living spaces.”
As LG expands its collaborations with leading partners in the arts segment, users are invited to explore a diverse range of artistic expressions from around the globe, all from the comfort of home.
# # #
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.